kryptonitewhite

excellent answer ive always wondered where Meade's F3 is with it being a 27Hz tune iirc with the port being loaded right off the boot like that

oh kick ass on the T-line... I'm going to be attempting one way off down the road... keep me posted

that is aweome! I'm not seeing what you have for an enclosure that allows them to move like that without complaining. I've never heard and seen it before without a car amp where unfortunately SSF are almost always undefeatable, now with this tiny HT plate amp I found this from 2:40 - 2:50 http://www.youtube.com/watch?v=DiHlU...e=channel_page

your vid separates the 7Hz from the 18Hz much better... whats ure enclosure

Kick ass! Thank you! What program you using?

I heard the low note is 16Hz or something like that, but there is a note around 3-6Hz several times

one of those pics is now my background.... excellent work

I'm not seeing a compression chamber, and I also love how those aren't tapered... is that strictly 1/4 wave taking into acount Fs only for the length, or what all is calculated there... Sd to determine height x width?

2 L7's... I loved mine

rockford fosgate Punch Power, MTX 5000,7000... Series 1 lol

Diameter wise was everything I was expecting... I remember the 1st 18" I saw, Kicker Comp old school, back when PPI came out with the flat cone sub (did I lose most of you already? I'm old) I've seen many an 18" in my life... But the surround on this thing, and watching it go to it's limit.... so much more than I expected!

I have imagined an 18" forever, I've gone to see some here and there... but actually having one, holding it, turning it over... I can't believe just how big it really is. I used to run 15's. So I gotta know what an 06' XXX is like. I don't think I could want any more. Sure, I'll be going 22" but I'd almost have to think I'd preffer a XXX 18. HUGE!

Vd of 2 18's more Xmax! I didn't get to select anything but 2ohm or 4ohm, but Fi is grey.....? http://www.hometheatershack.com/forums/fi-...ted-22-ib3.html http://www.hometheatershack.com/forums/fi-...ld-produce.html

that's just disgusting. if it follows suit with comparing the ib 18's with 22's, one 22 is equal to 2 18's... steve meade does 4 22" fully loaded with 2 t15k's or 2 kicker warhorses...

If Exodus Audio does their 21" Maelstrom-X then i will get that before the Fi. I also heard Soundsplinter is doing an HT 21". I don't care what brand it is, if it has high Xmax, low Fs, low inductance... I want it! Bigger? Better! Ya, there are lots of people doing IB setups for HT with 4 Maelstroms, 4 IB18's, or 2 RL-p 18's... very low power requirement, strong output to 10Hz. I preffer LLT designs... large and low tuned to implement the rear wave. My ultimate wish right now is the Sicko... 21" with neo magnets, 4" VC, 5,000 RMS, 40-60mm Xmax (in the works, can't recall target number). Uses the XBL^2 Parthenon motor Fi is making a 22" car audio driver as well.... IB3 22" and IDK what series the automotive will be

Dude, I totally missed your post! My bad. 18cubes 10" sonotube port.... can't say on the tuning, cuz that starts a whole big debate I have a Lanzar OPTI2000D right now which will give it 1100 watts... perfect acording to Scott, it's rated 550 watts mechanical free air and he said double that thermally if it were in an enclosure. The 22" I am hoping for D2 for 2 Kicker 2500.1's :hairtrick:

You should see the pole vent... I don't think I could pull it off, I wish the 'ol lady had some toys...

This is temporary until Scott from Fi finishes the IB22, or Kevin of Exodus finishes the 21" Maelstrom-X. With those subs in mind, they need HUGE airspace.... 18cubes after displacement, and I'm not gonna say tuning ( get hated too much for it ) Some day I plan to have the 21" Sicko from Exodus when it's complete... it will implement the Parthenon motor

pron: enjoy (I did)

you have an 06' xxx?

Just got her today... She's beautiful, she's huge, and she can MOVE!

headed in the right direction... nice to see... I see lower power handling as lower power requirement, Vd=SPL Hz for Hz... so if it takes 3,000 watts at 45Hz to get the same cone to same excursion as the other sub that takes 800 watts, SPL should be the same.

last bump 4 this piece of junk

if i get stuck with it, I think Ill still be OK. i can be honest about it thanks man!