Jump to content

kryptonitewhite

Members
  • Posts

    491
  • Joined

  • Last visited

Posts posted by kryptonitewhite

  1. the camera batteries were low on the last 3 so no video showed up, I redid them.... paper and plastic bags to show port velocity which blows all the way up to the dashboard (not caught on these vids tho)

    only if youre really bored... nothing too exciting with this camera.. but I borrowed the good camera today again for 2 more good vids, they should be sweet but not posted till probably tomorrow

    this ones longer and more of the same

  2. it hits HARD and she hates it, me too... If I was tuned lower it wouldn't be so bad. This is with the shitty camera again, and I'm gonna go do more with the bad cam after the batteries charge cuz the last 3 vids, of course the better ones, came out with no video.

    This is a box with a hole in it, as the video clearly demonstrates, it is NOT tuned to 33Hz :rolleyes:

  3. barely used, I have a single 2 ohm Fi IB3 18" and the opti loves 1 ohm and .5 ohm, 2 ohm not working for me

    $250 plus shipping.

    Picture001-1.jpg

    Picture004-1.jpg

    Picture002-1.jpg

    Picture003-1.jpg

    DSC_0001-2.jpg

    DSC_0002-2.jpg

    http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0003

    http://www.importtuner.com/reviews/p...er/system.html

    Quote:

    TEST RESULTS OUTPUT POWER @ 1%THD, 1KHZ, 14.4VOLTS

    MONO @ 4OHMS 770 WATTS

    MONO @ 2OHMS 1118 WATTS

    MONO @ 1OHM 1687 WATTS

    MONO @ 0.5OHM 1962 WATTS

    OUTPUT POWER @ 1%THD, 1KHZ, 12.5VOLTS

    MONO @ 4OHMS 673 WATTS

    MONO @ 2OHMS 988 WATTS

    MONO @ 1OHM 1406 WATTS

    MONO @ 0.5OHM 1635 WATTS

    DISTORTION AT RATED POWER, 1KHZ, 14.4VOLTS

    0.14% @ IMPEDANCE

    INPUT SENSITIVITY 250MV TO 8VOLTS

    FREQUENCY RESPONSE ( + 1DB) 15HZ -130KHZ

    S/N RATIO (A WEIGHTED, BELOW CLIPPING, MIN GAIN) > 83DB

    SLEW RATE 6.5V/MSEC

    DAMPING FACTOR @ 100HZ, 4 OHMS 105

    IDLE CURRENT 2.1AMPS

    MAXIMUM CURRENT CONSUMPTION,

    UNCLIPPED 117AMPS @ 1152WATTS

    EFFICIENCY AT 1/3RD POWER

    LOWEST IMPEDANCE 79%

    EFFICIENCY AT FULL POWER, 1%THD,

    LOWEST IMPEDANCE 85%

    CROSSOVER SLOPE 24DB/OCTAVE

    CROSSOVER RANGE, LOWPASS 48HZ - 155HZ

    SUBSONIC SLOPE 24DB/OCTAVE SUBSONIC RANGE,

    LOWPASS 14HZ - 56HZ

    LOW FREQUENCY BOOST +19DB @ 43HZ

    DIMENSIONS 19 1/8"L X 10"W X 2.5"H

  4. Ha, you changed it becuase of the termlabiens? lol, I loved the 15hz vids man

    I never expected to get love for them, been a passion of mine for years. Fact is, my woman and I both can hear and feel the super low songs much better at 15Hz. I know that doesn't make sense, because being in-car I would guess would drop the enclosure tuning and transform it into a 6th order/horn as well, where we would be sitting inside the mouth. So I really expected 20Hz to not change that much, and I thought 25Hz would in effect really be tuned around 18Hz... so i thought Bass I Love You and a couple other sub-sonic songs would really perform much much better with a 25Hz tune. NOPE!

    Today I'm gonna bust out the shitty camera again though and make some vids of the massive airflow I get now way up at 33Hz. I di actually get a bit of port compression and a lot of turbulence I think, even with a 7.75" x 3/4" port LOL

  5. haha.. ill star u back bro i dont star anyone i just leave comments lol

    anyone who shows any love I've stared, but I'm sure this won't last long.. I won't even check the site after too long except when I get email notifications, then I'll go down the list and hit everyone back

    Rimz... I wish, if I had $$$ I wouldn't have got an Azteck in the 1st place, cuz I could get a nice a sride and rebuild it from the ground up. I'm broke ass but I make due with what I got :D

  6. Why not try an Audiopipe 3000?

    Their SSF's lowest setting is 5hz.

    Cheapest Online.

    ya, the guy in my thread for 2500 for under 500 pretty much has me talked into it, but even though I hear nothing bad and everything good about those, I know kicker and I dont know audio pipe... I'm scared! And does it do 2000 RMS at 2 ohm, or 3000 RMS? All websites say 2000 but he took a pic of his manual for me, and the manual says 3.... but why isn't that advertised everywhere else?

  7. cut the port from 10" to 4.75" went from 20Hz to 25Hz. Over all it s a little louder, but the low low songs the low parts all but disappeared. Bass I love you blows SERIOUS air way up front, gotta get some vids with the good camera. (edit: but you cant hear/feel the 18Hz tone at all the same way as before) Bottoming is not an issue now when songs change and we go from sub 27Hz tracks to songs from 27Hz-35Hz with the doors shut. Bass I love you just about hits bottom with the doors open, but I won't be driving with them open! I think I like the 15Hz the best, 20Hz second, and 25Hz the least.... I didn't expect that, I thought it would get much louder with a lot less excursion tuning higher, but thats actually not what I'm seeing overall... but that varys so much from song to song.

    DSC_0001-3.jpg

    DSC_0002-3.jpg

    the longer 10" from yesterday and the 5" from today

    DSC_0003-3.jpg

    DSC_0004-3.jpg

    DSC_0006-3.jpg

×
×
  • Create New...