-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Budlite70
-
-
im using clarion eq,what do i set the volume on it when checking for distortion?
-
This will be a hot item. I predict supply<demand being an issue when released. I will be on the list to pick one up!
Good work and good luck!
I agree they will prob run out of em quick!
-
yea,when their ready post it up so we can order!!
-
yes it does,thanks guys,what i figured but wanted to know for sure.my volume just turns up quicker
-
What are the differences between hu's that max out at say 50 compared to like my kenwood that is 35?Anything or do they just raise volume quicker?
-
so my wimpy 500 not enough then huh,oh no
-
the gain is half way,used the multimeter to set it.
-
ohno,i got em all up,lol,just not much bass with em off,is that because my alpine 500 not enough for the cvr's?
-
ive heard that if your hu has a crossover and your amp does too,to just use one or the other or they can cause sound issues.
what about bass boost?my hu has bb one and two level,plus subwoofer output level,and the amp has bass boost,ok to turn em up as long as subs are happy?
-
no expert but prob sound distorted,but good question,my cvrs only getting 500 with gain half up,so let the pros take over!
-
lol hmmm now i know why mine seems louder opened up too!
-
ok thanks again,i will see what i come up with,try to post some pics also
-
id say go with the 18!would look sweet back there!lol
-
CVTs would of been perfect for your application but gotta work with what you have.
yup lol im gonna get a snugtop some day then my troubles be over but for now.....
so with the port 4x10x20 it'l be about 32hz,That wud be good for these subs right?
-
Thanks a bunch,i couldint find the dl page,I can make the port alot bigger,and as long as it needs i think,since im
doing common chamber.
-
ok i found this on some other post,how in the world do you figure port sq inches?lol
so here is that post.....
ok so the box is around 5 cubes and your only have 31 square inches of port. that gives about 6 square inches per cubic foot, you need at least 12 square inches per cubic foot. that will make the biggest difference for you at the moment. thats just rough math but it clearly points out your weak point
-
u need double the port area
and the length will be deeper than the depth of the bottom so u need to find another way to port it
thanks for the replies,using the 12volt.com calculator,making the port 12.5 which is total width i can go,
and going 2" high it says about 8" deep would tune to 33htz,is that all wrong?you guys know what your doing
so tell me what you think or make fun of it,lol
-
Hey im new here but have been snooping all over!Looks like a great site,lots of good info.
Heres my project.I have two kicker cvr's 12 inch.I have a 06 f150 regcab so gotta make a small box,
right now they are in a seal box with only about 1cuft each,im going to build a ported one,common chamber.
56w,24t,14bd,4td.
I was gona put the port on one bottom side,about 12.5 X 2.how deep should the slot length be?
thanks for any comments!
new product - "Distortion Detector"..NEW PICS page 22 Video Update page 26
in SMD Distortion Detector (DD-1) Topics
Posted
So what kind of warranty to we get if we order now?just in case .....