[Update: 2002 Yukon - 24" Oasis Wheels, Bumpers, molding, emblems Plastidipped black!]

Do white plastidip on wheels and rest the stuff

[Sundown SAZ 3000d *NEED HELP*]

I got a ap1500 in their and works fine and I take it out put sundown 3k in their and conect as usual it don't play... Does the 3k not like the rcas or something I have no clue

[Wtb sundown 3k bass controller]

Title.. Sundown bass knob I need it ASAP lmk what you got.

[Sundown SAZ 3000d *NEED HELP*]

There is no mater\slave switch. I have checked all over the amp. Its weird. there usually is one on alot of amp brands i know.

[Sundown SAZ 3000d *NEED HELP*]

Okay so i recently bought a sundown saz 3000d from someone off of SMD forums and its in almost mint condition, but i am having troubles with the setup. I dont have a remote bass knob (controller) for the amp and was trying to run it off the headunit alone. On the amp there are one set of inputs and there is a Br-out and a Br-in. I hooked the rca cables into the input as you normally would on and amp, but my sub isnt even coming on. the amp has power, everything is working properly because i just removed another amp. The speaker wires are hooked up. Is it not playing because i need a remote bass knob (controller) that fits into the (phone line shaped) remote controll input? I put one of the rca cables(red) into an input and put the other rca cable (white) into the Br-input and the subwoofer is playing so basically the amp is acting as a slave unit and not a master unit. but when i try to set the gain it has no effect on the subwoofer. So basically its a slave unit. the only thing i can think that would effect it is if i need that remote bass knob. can someone knowledgeable about this kind of thing help me out?

Thanks.

[Which wire?]

How many runs of wire for 3.5k? With each of the wire.

[Which wire?]

You can find 4/0 boat wire on ebay for pretty cheap, if flexibility wasnt an issue i would get that.

. Send me a link to this everything I saw is like 6.50$ a foot..

[Which wire?]

Is the 1/0 welding cable close to the knu 1/0 in size? Or 2/0 closer? http://item.mobileweb.ebay.com/viewitem?itemId=300725230334&index=0&nav=SEARCH&nid=84964993163

[Which wire?]

Trystar 2/0 http://item.mobileweb.ebay.com/viewitem?itemId=290727650574&index=0&nav=SEARCH&nid=99920442939. Or knu Kollodsus flex http://www.knukonceptz.com/productDetail.cfm?prodID=KFX0BL-50 which would you run? Flexibility not a issue

[What's good wire?]

http://www.amazon.com/KnuKonceptz-Kable-Gauge-Power-Black/dp/B004Z0YB5Q/ref=sr_1_fkmr0_2?s=electronics&ie=UTF8&qid=1341020949&sr=1-2-fkmr0&keywords=knu+wire+1.0

Knu KCA 0ga wire 1.95/ft + shipping

30ft is $13 shipping

Works out to 2.36/ft not too bad.

they have several colors.

Not really interest in cca really

[What's good wire?]

xs power or knu

120 for 50ft if cca I rather not.. And the copper from xs I think is over 200 just more then I want to spend. Im trying to stay on a tight budget

[What's good wire?]

Anyone else?

[What's good wire?]

Don't need amp kit just need 2 msybe 3 positive runs to the back and ground battery in back to frame maybe a run Of negative tO the front. Plan on running 3k with plans to add more in the future. Would a 50ft roll of the knu kolosus be worth the 50$ extra over the 50ft of welding cable?

[What's good wire?]

Is this good? http://item.mobileweb.ebay.com/viewitem?itemId=200555955732&index=4&nav=SEARCH&nid=43884545550. Or is this better? http://item.mobileweb.ebay.com/viewitem?itemId=180869636182&index=2&nav=SEARCH&nid=01107475961. Or is their anything better or different I need to look at?

[Need box design for single aq hdc3 18]

I just went ahead with the first design, I got ahold of a router but need to buy a bit for it, got all the peices cut gonna assemble it tomarrow

[Need box design for single aq hdc3 18]

Joe i need help fast message me if u can. I needing help if i was the 2nd assembly method about the port dimensions

[Need box design for single aq hdc3 18]

And 1 sheet or 2 of Mdf?

[Need box design for single aq hdc3 18]

35hz should better to you? And with that other assembly way the port is the same deminsions? Thanks man you've help me a bunch sub should be here today super excited

[Need box design for single aq hdc3 18]

Joe could i move the sub toward the center more and 45 the corners will it be fine like that?

[Need box design for single aq hdc3 18]

If I can find a router I would like to. Round off everything, I would like to do the 45s every where how many sheets of Mdf would I need?

[Need box design for single aq hdc3 18]

I think this will work and which is the inner corner on the port? I'll just throw couple Dow roads in there and resin it I think it'll be fine not a whole lot of power on it.

[Need box design for single aq hdc3 18]

^ how would you do baffle then? , I like the design what about a little of bracing it or should just resining it be fine thanks for the help

[Need box design for single aq hdc3 18]

I need box design and needs to be simple(my first box build) 32hz not sure on cubic feet I've heard like 6-6.5

Just need a cutsheet nothing special

L-46

W-26

D- 26 and under.

Amp is ap 1500 at 1 ohm need ASAP thanks I'm advance

[DC Price Reqest Thread]

2 lvl 3 15s

2 lvl 2 15s

Shipped to 38632

[Need some suggestions with choosing subs.]

Really... I had tread smilar and it got locked....