[Best amp for 1 Fi Q 12]

AQ 2200 or something similar.

[dd-1 puts amp into protect]

Turn down the gain a little.

[1000-1500watt Mono Amp]

Sooooo... you can post a wtb ad with less than 150 post? Makes sense.

[wtb high out put alternator for grand cherokee laredo?????]

Year and engine size would be good...

[Running Wires Straight Through the Box.]

Silicone. Easy to pull apart if you ever need to remove wires.

[WTB AQ 2200D, bc2000d. or good 2k-2.5krms amp]

AQ 2200 popped up on caco.com today if your interested.

[WTB: ED Nine.1]

I have $180 shipped. Let me know.

[SOLD]

Looks like we have a bunch of people from Nebraska in here. GLWS

[96 suburban build]

Nice build. Im tuned in.

[Jeeps!!!!!!!]

That thing is nasty.

[Sundown 2012 Amp Line... first bit of information!]

can't wait to see some test results from these

Also cant wait for some test. Looks awesome.

[Jeeps!!!!!!!]

This is my old setup, I shouldn't of sold it. New plan is 4 12 RE SE's reconed by FI.

[WTB Stinger Volt meter cover]

I know this is probably a long shot but I got a stinger volt meter with no cover and was wondering if anyone had a cover off a broken meter they would be willing to sell me one.

Thanks

[WTB RCA's]

Like the title says looking for some RCA's. I would like to buy some knu krystal series. I will do 15 shipped to the first person who PM's me. Also, they need to be 17-19 feet in length.

[1500 @ 1ohm]

Got the amp taken care of now just looking for a 15 FI Q.

[15" FI Q]

Got one Q looking for another. Need one shipped to 68506. Let me know.

[1500 @ 1ohm]

As the title says im looking for 1500 @ 1ohm. Let me know what you got.

[Radioshack SPL Meter]

interesting....

[Need advice on spl build.]

We had it clamped the same day, the ohms rose to about 5 and it did only about ~1600 watts. So with impedence rise, if we did wire down to .5 ohm the amp really wouldnt ever see it. Is it still a bad idea?

[Need advice on spl build.]

Yes the setup is just for burps.

[Need advice on spl build.]

My friend and I have been working on an spl build to take to a competition coming up. We have an Audiopipe 30001D with a 15" FI BTL. Its in a 93' mazda mx-3. The box is 5 cubes tuned at 45hz. The car peaks at 50hz. The box has 45 degree bracing's in each corner. We have 1/0 running from the battery to a distro block, then 4 gauge to an optima red top then 4 gauge to amp. We are replacing the speaker wire with either 10 or 8 gauge. We also have been told to paint the inside of the box and silicone it. The amp was run at 2 ohms and we are considering doing a half ohm burp. The length from distro block to battery is about 3 feet then another 3 feet to the amp so theres about 6 feet of four gauge. The box will be wrapped in duct tape also. We hooked it up to a termlab today and got a 146.5 in the kick panel with driver door open and sunroof open. when everything was sealed we did around a 143.8.

Questions:

Will the audiopipe handle a .5ohm burp?

Wiring the sub to .5ohm isnt a problem but how would we plug the wires into the audiopipe?

Is there anything else we can do to gain db's?

[WTB: 18" woofer rated to 1000-1500rms]

I have a 18" FI BL. With flatwind