bobobass
-
Posts
494 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by bobobass
-
-
Your alternator is probably on it's way out. Get it checked out.
-
-
just the big three and a stock battery. Works great for the 1200 watts I'm pulling. The alt is supposed to be a 90 amp but I haven't dropped below 13 volts at full power. There is dimming but it's not horribleAny electrical upgrades? Big 3? How's the dimming?
-
fix those loose wires on power wire, don't leave it like this, not safe
It was just a mock up. This are just some scrap peices of 2 gauge laying around. When I actualy use the wire in the car i make 100% sure that nothing can be shorted out.
-
well i realized i have never made a build log here so i decided to start one now. im running a single fi q 18" on a aq 1200d in a 6 cube box tuned at 33 hz. hits the lows real well. iv had the system for about 2 years now, but i just decided to clean things up a bit and install everything the proper way. well, heres some pictures.
heres a mock up of how im mounting the amps
heres some pictures of the box
the whole full build log is here for those that are wondering. thought id start here because its essentially a new build.
http://www.soundsolutionsaudio.com/forum/topic/43051-18-subaru-outback-build/
-
Could be the plugs or wires. I had a similar thing happen to My Subaru where the engine hesitated a bit and got some nasty vibrations under acceleration. It was just bad plug wires that kept one of the cylinders from firing every cycle. Have ever changed the plugs or wires on it?
-
Aq1200d one of the best amps you can get in the price range
-
Nice! Those Polk db series sound great!. I'm actualy currently using one in my home theatre
-
Don't waste your money on those bass blockers. They are nothing but overpriced capacitors. Find a 8 micro farad capacitor and put it in line with your tweeter and you have the same thing just many times cheaper
Edit: here's how much cheaper.
http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=027-338
-
Looks sick. I wonder how loud it is.
-
Wahhhh?!?! You used a heat gun on your hand?!?!
-
Anyone going to do this with some 1/0?
-
Just noticed this today! I think it's kind of stupid.
-
Damn I am really tempted to preorder one even though I have no use for one lol. Maby use one in a ht setup?
-
Head over to the Skar section and read the sticky combo
Package 1 - $649.99
-(2) SKAR VVX10/12 (Either Coil)
-(1) Sundown SAZ-1500D
I'm going to say that is an amazing deal.
-
Il recommend an fi q and an aq 1200d. O have them and my sub gets loud and sounds great!
-
See if you can make any sense from mine
-
Looks great but I definitely recommend going with a double baffle.
-
I'm prety sure all batteries terminals will corrode without dielectric grease
-
You can get AQ 1200 to match the sub
thats what im doing later but im strapped on money right now lost job so been just gettin money slowly so im going to get that once i get my other 15 and stuff.
My advice is to wait to get it done right the first time around. Remember you are going to be spending allot more money in the end. Just my .02
-
-
Crunch 500.2
-
It's a soundsplinter. They are great subs and are rare to find now that the company went under. I'd buy it
-
get another one and make a custom pair of headphones
"beats, by meade916"
.gif){kind=small}
single 18" in a subaru outback
in Member Rides & Builds -- Show off your whip, Show off your System!
Posted
Well, I got some more work done today. And have some pics to upload. Il do that when I get home. Ran wire for the doors and worked on the amp rack some more. Right now I'm trying to think about how I should finish the box. Bedliner, vynle wrap, or carpet? What do you guys think?