01VWGREENMACHINE
-
Posts
421 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by 01VWGREENMACHINE
-
-
ya these guys have it right. use a standard relay. pin 85 to remote wire off radio with a switch between deck and relay (this is low amperage so switch doesnt get burnt up), pin 86 to ground, pin 87 to constant (20 amp fuse may be to much for a few leds), and then pin 30 to all the leds.
I agree with baaudio put the switch on the remote wire that is how i have my stuff set up
-
PIONEER AVH-4200DVD
Sorry on the delay had to test it in the vehicle got it in but pulled it back out still waiting on a few things but was shipped super fast well packed and in new condition!!! easy transaction will do business with him again!!! love the HU ill put a link in here once i install it!!! thanks again Knowledge!!!!! I RECOMMEND THIS SELLER
-
thanks for the info guys ill do some dinkin with the port on 3.5 cubes we will see what happens
-
-
any help at all???
-
trying to figure out what the best box volume is for Alpine SWR-1242D. the manual says 1.7 gross but for some reason i think they need a bit more
any ideas will help thanks in advance!
-
Can we buy just the black boot?
i second this
-
I WANT ONE ?? got a release date yet?
-
ok its exactly what i said issue is its only got the suction cups to hold to the windshield but when my bass goes it pops right off any help would be awesome thanks!!! in advance
-
Only 3 and you want a buss bar? Seems like a waste of metal. Adding metal does add resistance. I have put over 10 runs on one terminal before, don't know how you are having issue with three....
it all looks like shit
i want to clean it up thats all
-
Is there anything wrong with the way you have them, or just want them to look clean? Just curious cuz thats how mine look but i got 4 runs temporally, wanted the system to play already.
i want them to look clean and its a pain in the ass to take em off and on when i am redoing stuff and i will do it till everything is right. what i want is a distribution block with 1 1/0 in and 3 1/0 out make a super short run from the batt to the block the batt terminals are all cut up and same with the ring terminals it looks like shit
-
no drill press or i would have made my own distribution blocks and been done with it
-
where can i get something like that?
-
im having an issue connecting 3 1/0 ring terminals to my batt. i have 3 for negative and 3 for positive. so im looking for another way to hook them up that looks good any ideas would be awesome thanks!!!!!
-
i kind of have the same issue but im sure its just the amp dis charging it only does it when i disconnect my rcas from the amp. I called rockford fosgate on this issue seen its a 1500 bdcp they told me it was normal because the caps wer still charging and discharging not 100% sure if this is your issue but thats what they told me. i may be wrong and if i am please do tell the solution. i have checked my grounds to my rear batt bank and all 3 1/0 cables have 0.0 ohm for resistance so i dont think its my grounds.
-
would be sick to meet up with some of you and do some demos =]
kamahaobuilt13
maybe we can talk you into meeting up halfway or something and do some TL testing =] hell i might drive over just for the fuck of it. that's my next purchase just saving the money its gonna be a while.
-
do you have a tl?? i would like to get numbers sometime soon just no money to spend on a tl i just dumped 3 g's into my car rebuilding the motor and trans
-
I am in Spokane. There is a couple of guys in this area. Did you make it to the Aspen sound comps this summer?
no wasnt done with the system but a buddy of mine matt at aspen sound in cda gonna get dialed in with him next summer get to some shows
-
Just lookin for people in spokane area to do demos with hit me up!
-
-
well these are the cables im runnin
Stinger SHI2317 HPM3 Series
i was told i would get better output with a higher preouts
my amps are in my sig
just looking for options
-
is there a line booster to make a 2 volt preout to 4v or higher if so what brands are good
-
alright i have plenty of room in my 01 gti for a double din problem is a double din with all the features i need or i feel i need the hu is like 1200 bucs or more. but the major issue is 90% of the double din hu's only have 2 or 2.5 volt preouts and they only have a front and a rear or sub i want 4 volt or higher and i want front rear and sub pre outs is there options out there that will help me reach my goal without spending 1500 bucs???
-
Order #100000650 GOT MINE ORDERD!!
2 Rockford t1500cp... how much electrical?
in Amplifiers
Posted
what kinda car you have?
i have a hc 800 with 1 t1500cp and a 200 amp alt and my voltage doesnt even drop at full tilt