01VWGREENMACHINE
-
Posts
421 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by 01VWGREENMACHINE
-
-
-
our company buys about 50 bikes every year and we assemble them bring in kids that are in need of gifts and we give them the bikes
-
Alright this is a quick thing that my job does for the holidays
the whole company took a few hours to assemble some bikes and give them to kids that need them! its bad ass here are some photos!!
we also spend time gather donated cloths and such to give to needing family's!!
-
the issue is more than likely a corrupt operating system (or files in the os) i bet if you re-install windows it will work just fine or if you can use your os cd as a boot cd and select the option to repair windows that might work. let us know
-
I was wanting to get the 1000/1 but it cost a little more than the rf t1500-1bdcp and I could run the rf at 3 ohms and it would give me more than 1000 watts. Is this a good idea guys?? Let me know what y'all think!! Thanks!!
its a great idea i love my t1500
-
-
if they are both 3.5 you should be fine there probaly dual 4 ohms woofers just my guess
i can switch between 1 and 4 ohm
-
noob question i know
i have 2 rockford fosgate t1d212's and i pulled them out of the box for the first time in 6 months and the coils are black. they sound good still no scratching they move freely and dont bottom out and they have never smelt burnt. they are in a ported box
also hooked to volt meter to check ohm and i am getting 3.5 ohm per sub when wired to 4 ohm
Does it look like paint? I've heard of some voice coils being painted to identify the ohms of the coil. But I think they were DC subs.
i wish i could get a pic ill try
-
hook a dmm up to the coils and see what it reads. the color of coils isnt too important for example i know dc dyes some of there coils different shades so they can tell the difference
getting 3.5 ohm per sub i subtracted the resistance of the wires themself
-
noob question i know
i have 2 rockford fosgate t1d212's and i pulled them out of the box for the first time in 6 months and the coils are black. they sound good still no scratching they move freely and dont bottom out and they have never smelt burnt. they are in a ported box
also hooked to volt meter to check ohm and i am getting 3.5 ohm per sub when wired to 4 ohm
-
could it be the fact that my woofers are blown?? the coils are burnt
-
check all connections, one may be loose...
been there done that
-
How low of a voltage drop do you have at full tilt? Got a h/o alt? His manny bats?
200 amp ho singer alt runs at 14.1 it doesnt see 13 at all
dual batts stock up front and hc800 in rear
-
first off i haven't had any problems with my amp its a rf t1500bdcp and i have 2 rf T1d212's running at 2 ohm's.
problem is every so often it will cut out for about 10 seconds. amp is not getting hot at all, the grounds are all good at 0.1 ohm is all im getting with my volt meter. its getting plenty of power so im stumped any help would be awesome.
thanks in advance!!
see my build for more build info and pics in my sig below
When mine did that was when I had a 4 gauge wiring kit with 2 kenwood performance series 1,800 watt amps. I Went to a 0 gauge wiring kit and it stopped. And it only did it when I was hitting hard. But, when I was just cruising and had it on low it was fine. If you already 0 gauge then idk. Bad wire maybe??
well not sure if thats it but i have all 1/0 stinger wire exceot the last 12 inches from the dis block to the amp. the amp only has 4guage wire inputs
-
first off i haven't had any problems with my amp its a rf t1500bdcp and i have 2 rf T1d212's running at 2 ohm's.
problem is every so often it will cut out for about 10 seconds. amp is not getting hot at all, the grounds are all good at 0.1 ohm is all im getting with my volt meter. its getting plenty of power so im stumped any help would be awesome.
thanks in advance!!
see my build for more build info and pics in my sig below
-
I think imaa do dat, im not really worried about weldin or anythin im a welder myself so no big deal ima just get under their and grind off the chasis real good
didn't mean welding specifically i was talking about the current running threw the metal has a better connection on the frame then the chassis
Oh oh ok, well im foin the big 3 because I have a single cab chevy silverado with a blow through with 2 15 fi bls and my lights are dimmin way too mush, my voltage goes down too 9, I was planning too weld a plate on the chasis between the cab and get my capasitor and amp grounds from their because right now I have dem just too the seat bolt, will this helpp too or just by doin the big 3???
big 3 will help alot either way you look at it but i would go strait to the frame way better ground
-
I think imaa do dat, im not really worried about weldin or anythin im a welder myself so no big deal ima just get under their and grind off the chasis real good
didn't mean welding specifically i was talking about the current running threw the metal has a better connection on the frame then the chassis
-
Ok I have a lil question, im going to do my big 3 setup today, but I was wondering if I could connect the negative of the battery too the Chasis, instead of the frame, also connect the motor block too the chasis too, im kinda confuse and ideas will helpp thankk you!
you can do that but its better if you run a 1/0 to frame and engine less crap to go through such as spot welds and paint (correct me if im wrong) but its totally up to you
-
Thanks for the info about the T1's and T2's, I might save up the extra 30 to get the T2's, but I hate how sonic eltronix is always taking out sales, from time to time the T693's are in and sometime they arent.
i payed the 210 from sonic electronix and love them they retail for 500 so 210 i aint worried. i will be buying another set as soon as i get a new 4 channel to handle them
-
so im getting a cheap black n decker router and was wondering what size bits would i need?
mostly 1/4 inch bits
-
it would be a great match up for a set of t2 comp they are 209.99 from sonic and worth every penny!
-
i just finished installing mine on a t400.4 t2652-s they are bad ass im going to buy another set!!! asap! for the rear!
-
alts are easy to install why do you need to pay someone to install it?? if you can install your own system you should be able to install and alt
-
Mike Singer for your alt.
i agree i payed 365 for my 200 amp alt shipped and Mike is great to work with
help amp cutting out
in Amplifiers
Posted
i think im over using the amp. if im running full tilt she will flip into protect for a few seconds. then resume normal play. if i dont turn my bass knob all the way up it wont do it.