EpicenterDesigns
-
Posts
1612 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by EpicenterDesigns
-
-
Troy is a preacher and also works a couple other jobs. A very good guy.
Also has some other things in the works. Like album covers featuring his blazer.
I forget what scripture, but you can see it airbrushed in the paint job in a ghost like pattern being revealed as it is ripped open.
Pulled it off very well.
-
-
-
-
-
I only have a few sponsored rides. This one is the only one together.
-
This item is at the painters. Then it goes to an airbrusher.
Pics as soon as possible.
-
beautiful.............the light blue paste.............what is that
It is Dominion Sure Seal Semi-Rigid plastic urethane paste.
It is a 2 part paste. Mix it 1:1 and spread. I use it and the flexable paste as a finish filler over the SEM urethanes. Will work equally as well over the Duramix.
The pinkish colored is the flexable. I ran out ofit so thats why I went to the blue.
-
Inspector #43 had to come check it out.
-
-
Wet sanded the primer down after a guide coat was applied. Not a great pic, but it is smooth.
Right after this is when I decided to shave that screw hole. So i did that, reprimed it and assembled.
-
Not a good pic, the other ones washed out with the flash.
But it has been body filled and smoothed with 220. Filler primer will flow onto it and I will wet sand it smooth.
That is all.
-
Thin plastic paste to fill in bigger holes
-
-
Liquid plastic applied
-
this is tacked in with CA glue
-
I made filler pieces and ground off extra parts GM felt the panels needed.
Shaved the 4x4 delete panel at the top by the center vents and the airbag cutoff switch in the center near the factory radio housing.
Also shaved off the vent adjusters and built up the center of the 2 middle vents.
Ended up shaving the body line and the mounting screw hole above the gauges also.
-
to see what it may look like, I cut the center out of the panel and dropped the monitor down in there.
Needs a little more trimming, but it will fit very nice.
Not too big, not too small. Keep the vents for that cool AC. And it is all touchscreen operated. Coolness.
-
If you don't mind......... :hj:
I use the SEM version. Basically the same exact thing made by a different company. Bad thing is, the guns are different, so interchanging cartridges won't work. :angry01:
And technically, it is not a dual action gun. It is a 1:1 static mix cartridge gun.
:tongue: just messing.
EpicenterDesign Sponsored Ride
in Member Rides & Builds -- Show off your whip, Show off your System!
Posted
Do you know Troy?
Or is there a few chapters around?