-
Posts
1844 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by basebalz13
-
-
I need a buncho for trippi's hummmmeeeeerrrrrrrrr!!!!!!!!!!
-
-
Damn...well if you wanna spot me a couple thousand dollars so I can build my truck...go ahead!
I'll def give you a thank you! lol
-
-
Please do, and in a 155+ install tho.
-
If that was true, then we would be shooting the sub motor/coil with compressed air during our burp to keep the temp down.
-
.46 DB increase, is a HUGE increase at that SPL level. Different voice coil temps, or whatever is not going to make a .5 db diff. Maybe in a Extreme vehicle.
Cody, Every amp has a sweet spot, A spot the gain likes to be. Also try messing with the phase if your just running 1 amp, or 2 amps strapped. If your running more than 2 amps strapped dont because you wont be able to achieve the same phase on each master amp.
10 X LOG (.46/10) = 11% power difference. 11% power difference = 11% impedance difference. So from 1.00 ohm to 1.11 ohms. Totally possible with very little heat.
Math and SPL dont go hand and hand...If that so they you should be able to calculate scores...and you cant.
-
.46 DB increase, is a HUGE increase at that SPL level. Different voice coil temps, or whatever is not going to make a .5 db diff. Maybe in a Extreme vehicle.
Cody, Every amp has a sweet spot, A spot the gain likes to be. Also try messing with the phase if your just running 1 amp, or 2 amps strapped. If your running more than 2 amps strapped dont because you wont be able to achieve the same phase on each master amp.
-
Full Carbon Fiber Level 6 15s.
this one
-
Lookin Good Bossman.
Still makes me laugh though that with all the tools and shit that you have in the shop, you still havent bought a good drill press yet lol
i thought about it but i didn't feel like going and buying it....plus, i have never tapped holes with a drill press, always by hand. Can it even be done on a drill press? I know you can do the holes, duhhh but what about tapping the threads?
No, you want to do those by hand always. You have a feel for it by hand...but machine you cant! too easy to mess the threads up
wheewww.....cool. I thought i was being a sissy. haha.....good to know!
Lol, yeah! Me and my dad got in a huge arguement over this with that F-150..he wanted to use the impact. I was tapping into steel so that a bit harder than aluminum.
-
Lookin Good Bossman.
Still makes me laugh though that with all the tools and shit that you have in the shop, you still havent bought a good drill press yet lol
i thought about it but i didn't feel like going and buying it....plus, i have never tapped holes with a drill press, always by hand. Can it even be done on a drill press? I know you can do the holes, duhhh but what about tapping the threads?
No, you want to do those by hand always. You have a feel for it by hand...but machine you cant! too easy to mess the threads up
-
Looks good steve, Noticed you was worried about the strength of the box...check into some Baltic Birch!
-
Ray, nice! I do something similiar but your way is alot easier!
-
make the ports the same length and prob pick up a good bit..lol
-
I was thinking it would be better to set it with car off, considering most drop to battery voltage anyways
-
I wondered this myself
-
Very nice Steve! Imma have to pick some up for sure!
-
I had 3 of the 4 K12's that was imported into the U.S. None are FS tho
-
Whats underneath this floor?
-
1 set GONE!!!!!
-
PMing everyone!
-
-
Frequency Response: 65Hz-20,000Hz
Impedance: 4 Ohm
2.7" mounting depth
-
1. Product: Got some custom made speakers made for me...they are based from the SHOK's that came out. They have a custom carbon fiber cone, phase plug etc.
2. Specs:
Bada!! haha, They are efficent, sound great and can take some power ..I sent around 200rms to each one.
3. Description/Condition:
Great condition
4. Price: :
75 shipped a set
5. Pictures:
New Build 70,000 Watt Build @ Mechman Alternators
in MechMan Alternators and 12v Accessories
Posted
Hey guys. Got some pics to upload for yall tomorrow. Product is starting to roll in....this is def not gonna be a build you want to miss!