[Updated 3/20/15, Fanaticz shows his Hoe some love finally... Spring is here back to work!]

Tuned

[Need contact info or DD-1 repair]

the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels.

The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion

same thing happened to me but might just not be enough voltage going to the amp. Also, as Steve said the light will come on and off while turning up the gain and NOT at the same point as YOU stated. Says that right in the manual. maybe i missed it but what equipment are you using? Line driver needed perhaps? You got the manual for the DD-1 correct?

Crescendo 2k and Rockford prime 4 channel. Kenwood HU

[Need contact info or DD-1 repair]

Okay I think the leads have a short in them. I just tested it on a 4 channel I have on my little test bench, when the base of the red probe is bent I don't get any signal but when it's straight I get a pretty strong signal . The distortion light is still a little weird but that might be the battery

[Need contact info or DD-1 repair]

the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels.

The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion

[Need contact info or DD-1 repair]

I'll give it a try, thanks man

[Need contact info or DD-1 repair]

I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't.mt show a signal on either amp.

Not trying to be funny or anything, but did you check to see if the battery needed to be changed?

I never got a low battery light on it so I never bothered switching it out

[Need contact info or DD-1 repair]

I got it used from a friend so I'm not sure if it's covered. When I would use it on my crescendo 2k the distortion light would just randomly flicker as I set the gain and when I used it on my small Rockford 4 channel it wouldn't detect a signal at all. Now it doesn't show a signal on either amp.

[Need contact info or DD-1 repair]

Does anyone know the contact info for d'amore? I need to get my DD-1 repaired but I'm not getting any response from the [email protected] email address.

[Project D.G.A.F - the SMD Tercel - 4 15" LVL 5 Walled - 16v, DC Audio 9.0k's 18v EARLY SPL results pg 28 new Podium Page 33]

Following now

[Changing your name:]

Could you change my user name too "K_SubieXT" please

[Sky High Car Audio vs DC Audio TAHOE BUILD OFF 10 LV6s and 75k WATTS]

Tuned in

[Soundman Car Audio in the Rockford Pressure Chamber]

wonder how it compares to this one i was in

That's the one I got a demo of at warped tour, It seems like that one was set up for music and the pressure chamber is mainly spl

[Soundman Car Audio in the Rockford Pressure Chamber]

Edit: double post

[Soundman Car Audio in the Rockford Pressure Chamber]

I got a demo of the Rockford demo van at warped last summer and it was epic! It was different than that one though