Jump to content

Nate Futuristic

Members
  • Posts

    1125
  • Joined

  • Last visited

Posts posted by Nate Futuristic

  1. Why the Hello does everyone think running at .5ohm is ok for everyone to do???? For the price of a proper electrical upgrade for a 1k or 2k amp to run @ .5ohm, you could get a bigger amp run safely @ 1 or 2ohm.

    i dont see a problem saying that crescendo says that there amps are 0.5ohm stable. an i will have decent electrical for it. an if i can buy that amp for around 360. an get 2500 watts or more of clean power. why wouldnt i?

    being stable at .5 is cool, but you're going to need about 2-4 runs of 0 gauge, upgraded under the hood, 2 in the back + a aftermarket alt so you don't drop below 13v with it at .5

    compared to 1ohm you'll get 2k clean, stock alt (depending on stock size), big 3, upgraded up front, and 0 gauge to the amp

    Single run of 1/0 cca 4 small xs power batts and stock alt...... i ran a aq2200d half ohm no problem even after a hour or so it got piss warm to the touch....

    Is it worth the risk to run that low.....nope

    But i did and voltage at idle stayed above 13v

    I would advise not to do it for the minimal gain/risk factor

×
×
  • Create New...