[Well heres another one .44 s&w ng]

Ya, the weights in the underlug are removable if needed. Also I've looked into haveing some made out of tungsten too. It's ported as well so between the weights and that it tames 95% of all loads. It's a great hunting machine!

wow ported also, i bet that thing barely recoils at all, did your local gunsmith port it or did you ship it off?

[Well heres another one .44 s&w ng]

If you want a manageable magnum load for two legged critters that wear shoes and a mask try CorBon 165gr ammo. For dangerous 4 legged game 300+ gr bullets solid lead provide devastating penetration. Awesome light shoe out of a snubby like that too!

I definatly will get some light loads for target practice next time, after shooting about 6 heavy loads my hand is buzzing.

[Well heres another one .44 s&w ng]

Here's my .44 backpacking combo. Not as light as yours but my crazy ass isn't running away from the bear I'd run toward him!!

Damn man those are sweet. On the bottom one are those weights on the barrel to keep it stable under recoil?

[Springfield Armory 1911 EMP 9mm]

Love it, 9mm in a 1911 platform is highly underestimated. The only thing I would do is verify functionality of the mags. That's always been the weak link in the 9mm 1911 platform.

Thanks, I will for sure do that when i hit the range.

[Springfield Armory 1911 EMP 9mm]

Nice weapon... FYI those are NOT clips.... They are magazines... I am just giving you a heads up that you will get made fun of for that

Right on man, I will call them magazines from now on.

[Well heres another one .44 s&w ng]

.

[Springfield Armory 1911 EMP 9mm]

.

[Jasper Circle Jig $40?!!! Seems expensive!]

That looks sweet, im guessing plexi is kind of expensive if you had to pay for it.

[should i trade my jl 1000/1 v2 for a ap 1800 amp]

i wouldn't either that ap1800 has a 70 signal to noise ratio. Why not just the sell the jl amp and buy what you want?

[For the love of God]

Grammar police on patrol. Wait till they pass.

[First time painting MDF HELP!!!]

Mdf sucks to paint. The best way to get a good finish is to coat the box with fiberglass resin and then sand it smooth. Then just paint it like you would anything else

I agree with this, the wood will absorb too much primer and it will be uneven without a ton of prep, coating it with resin, sanding down then primering as normal will give you the best finish.

[So this is what people think?]

Looks like an accurate video to me.

[Need help with 13w7 4th order]

That looks sick man.

[Got a good laugh from this one.]

Just put bass shakers under the seats and call it a day.

[Supporting membership help please.]

I was wanting to know who else to PM about my membership.I have sent messages to Steve and through the support mail through pay pals email links for SMD.To have them returned saying this is for sub orders.I purchased the silver on march 31st and have not heard anything.I have PMed Steve but no response there is only so much he can do with everything he has going on.Without post jacking I don't know what els to do.I hope this don't upset any of the mods or you Steve.

What does supporting member get you?

[Need some help.]

Im sure these guys will figure out whats going on, will be interesting to know in case it ever happens to me.

[Need some help.]

Just out of curiosity are you just cranking that thing all day long at full volume?. Im just wondering if perhaps you are frying 1 of the vc's then setting off a chain reaction of impedance then airspace.

[Where to put/mount tweeters?]

You only got 1 car? 16 is a bit much to throw in 1 vehicle, its almost comical.

[Need some help.]

how many ohms are the voice coils on those l7's, and how are the subs wired. Ive read that the amp you are using is not 1 ohm stable and could possibly be increasing the distortion at higher volumes.

[Need help with 13w7 4th order]

Damn 2.25 sealed is all u need for 2 13w7s??? That's crazy...it should sound pretty good tho

Damn 2.25 sealed is all u need for 2 13w7s??? That's crazy...it should sound pretty good tho

Yeah man i actually had to call him back to make sure it was for 2 because i also was suprised.

[Need help with 13w7 4th order]

Well problem solved, I called jl audio technical and I have to say they are the most helpful technical support ive ever dealt with over the phone, emailing was a waste of time so dont bother. He gave me the first set of volumes in like 2 mins but that was tuned to 58hz, So I asked if it could be a lower tune for a convertible, he said sure give me a couple minutes to model it and these are what the box volumes will be for 2 jl 13w7:

this is the first set of volumes he gave me

2.0 sealed net

3.0 ported net

100 sq inch port

16 in long tuned to 58hz

that was too high for what im putting it in so heres the 2nd set of numbers he gave me after modeling it.

2.25 sealed side net

3.5 ported side net

110 sq inch port

22.5 in long

tuned to 52 hz, will go from 31hz to 90hz

So thanks to the people that helped out, this is a huge relief.

[Need help with 13w7 4th order]

whats the car? i do believe this will be the first 13w7 4th order ive even heard about.

1965 malibu convertible, yeah ive noticed not many people like w7's.

[Need help with 13w7 4th order]

Right on man for the help, I just want deep bass, and with a convertible I am just worried that it will end up sounding like shit if i dont make the box correctly. Due to the curves, contours, and 8" step up in the trunk ill be making box entirely from fiberglass, already have the bottom molded and built up, just waiting on size before i cut it to match.

[Need help with 13w7 4th order]

Not sure if it matters but ill be running 1500rms to each sub in 3 ohm.

[Body Filler]

Polyester lightweight body filler is by far the best. It is so easy to smooth out and sands like chalk almost. I will never use pink bondo ever again. I use evercoat brand usually because thats what my paint store stocks. Once you go polyester, you never go back