Jump to content

Violence.

18+ All Access!
 View Profile  See their activity

  • Posts

    374

  • Joined

  • Last visited

 Content Type 

Posts posted by Violence.

  3. Too much power for lvl 6??

    in DC Sound Lab - Big Bass on ANOTHER LEVEL!

    Posted

    ive put a straight ass dirty clipped nasty signal through my level 6 coils and clamped 6500w doing it on multiple burp one after the other and they still held together. coils still look new. the glue will get stinky when they get hot. but in order to kill one of those coils you would literally have to smoke it. just beat the death out of it for over 2 minutes straight.

    if your going for 5k from that amp gains wise and your dropping into the low 12v range its never going to happen. you need more electrical and a alt. as the voltage drops the amp cannot produce a clean signal anymore and it will clip when the voltage drops down.

    i ran 2 cactus k5 amps strapped on a .8 ohm load, they use the same board. i had 8 xp1000 batts set to 18v charging, and had one singer 350amp alt with external regulator in front of it. and my voltage still would touch 16.8v on a burp.

  5. enclosure volume port area and how many watts waht is the connection ?

    in Subwoofers / Enclosures

    Posted · Edited by Violence.

    Also, the more port area, the less it controls the cone, so if you have too much port area, you can have unloading issues similar to having too big of box.

    No.

    he is correct to a point. i took 50 inches of port from my port, was able to burp more power and gained a little on the meter. if the port is to big it messes with the pressure inside the enclosure. my subs would unload completly under 32hz and cone control is non exsistent. shunk the port down and got the cone control i needed. but i was also around 22 inches per cube on the port. added a little more backpressure and all was good.

×
×
  • Create New...