dl9890
-
Posts
186 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by dl9890
-
-
2.0k
3.5k
48179
-
I've done a lot of research, don't buy the L7. You can get something a lot louder for a lot cheaper.
Hence that I said "I've done a lot of research" So now I'm indifferent about the L7 and realized how blind I was to other subwoofers out there.
-
oh shit, my bad you guys...thought that sub was rated for more than that. My responses are somewhat full of fail....
Haha, no problem. Honest mistake. But I think it's pretty good setup, it'll be better than my cvr's and my kicker comps I had. I would say so anyways.
just make sure the box is decent, the box can be the difference between a great sounding system and a terrible sounding system (believe me, i've been through my fair share of boxes). but in the right box, they'll be a decent improvement over the kickers
Yeah, it'll be a good box for sure. Right now I have a prefab box I'll put them in, yes I know it'll sound bad probably. But i'll get the wood down the road and build a good box for em' for sure.
-
oh shit, my bad you guys...thought that sub was rated for more than that. My responses are somewhat full of fail....
Haha, no problem. Honest mistake. But I think it's pretty good setup, it'll be better than my cvr's and my kicker comps I had. I would say so anyways.
-
Yeah, sounds a bit better to me also. I've been looking around for sub woofers for ever and now I finally found ones I like and now I can't pick one. I got this, I hope.
-
I plan on getting two 12" AA aresenals and running them on a DX1000.1 at 2 ohms which is 1,000 watts RMS. They are going into a ported box, thoughts, suggestions, ideas. Thanks.
from the things i've heard about em, you'll need much more power than a mere 1000 watts rms. I've got 1 vvx 12 and I'm putting that much power to that 1 sub
Maybe I should get a single 15" Havoc?
-
I plan on getting two 12" AA aresenals and running them on a DX1000.1 at 2 ohms which is 1,000 watts RMS. They are going into a ported box, thoughts, suggestions, ideas. Thanks.
-
Build a rock solid box. Tuned in.
Get a bigger amp.I'm going to be getting rid of my 2 12" Kicker comps and replacing them with a Fi Q 15" I'm going to be putting them into a custom box. It's going to be running off a DX1000.1 @ 2 ohms (1,036 RMS) Any suggestions or ideas/tips before I go forth with this let me know. Thanks!
That's out of the question.
What? How so?
-
Get a bigger amp.I'm going to be getting rid of my 2 12" Kicker comps and replacing them with a Fi Q 15" I'm going to be putting them into a custom box. It's going to be running off a DX1000.1 @ 2 ohms (1,036 RMS) Any suggestions or ideas/tips before I go forth with this let me know. Thanks!
That's out of the question.
-
I'm going to be getting rid of my 2 12" Kicker comps and replacing them with a Fi Q 15" I'm going to be putting them into a custom box. It's going to be running off a DX1000.1 @ 2 ohms (1,036 RMS) Any suggestions or ideas/tips before I go forth with this let me know. Thanks!
-
I've done a lot of research, don't buy the L7. You can get something a lot louder for a lot cheaper.
-
So one 15" ssd would probably be better than the 2 12s??
-
I don't think this would help anything but I have a 1250 watt power acoustik amp.
And what amp would you guys suggest? I don't really want to get rid of my amp. I'll probably look into getting different subs.
-
No problem, thanks. So my amp and these two subs would work okay? And if I got another amp ( the same one ) they will work okay?
well you are going to basically give those subs 1/2 the rated power which will work but, if in the future you decide to upgrade the amp to give those subs full power, then you would actually have to find an amp that does around 2000 watts rms at 2 ohms or at 0.5 ohms, its easier and cheaper to find and run an amp at 1 ohm.
So if you are gonna upgrade then it's better to get the dual 1's now, only draw back is that you would have to run them at a 4 ohm load with approximately 1/4 rated power each.
Maybe these subs aren't the right ones for me then. Getting a new amp is out of the question because I just bought the DX1000.1 about 2 weeks ago. Maybe I should find different subs? That's why I was going to buy another dx1000.1 so they would have complete power.
-
No problem, thanks. So my amp and these two subs would work okay? And if I got another amp ( the same one ) they will work okay?
-
Dual 1
DX1000.1 (2011 model)
2 ohm = 1,000
4 ohm = 550
-
do you plan on keeping that amp? cause you'll be basically giving them half power
edit: im asking this because you have to get dual 2's to use the subs on that amp, but you will need dual 1's if you plan on upgrading to a 2000w amp in the future. otherwise you'd need to get an amp that does 2000 at 2 ohms and not 1, which will be considerably more money
Yes I would like to keep this amp. I probably will get another one in the future.
-
After countless hours and research I think I'm going to buy 2 12" Fi SSD subs to replace my 2 12" kicker comps. I'm going to run them off a DX1000.1(2011 model). Should I get the dual 1 or dual 2? And how should I wire them? The box I have has 2 terminals and last time I tried wiring speakers it was just a mess. Any help would be good. Thanks!
-
I'm more than happy with my BTL N2. But if I were only going to run 1k I'd look at BL or Q depending on enclosure.
I'm thinking maybe 2 12" Fi SSD subs and another DX1000.1
And deff going into a ported enclosure.
-
Didn't know they weren't allowed, sorry. Just trying to get some ideas cause I can't seem to grasp a sub I want. So many choices it's overwhelming.
-
What is everyone's thoughts on these subwoofers. I've narrowed my choice down to Fi but I'm still stuck on what to buy. Maybe I'm over thinking it?
Build Plan: Going into a 2000 Jeep Grand Cherokee: Ran off a DX1000.1(2011 Model) Plan on getting one 15" maybe 2 12"
-
Yeah I'm leaning towards the Q for sure. But right now I have the DX1000.1 hooked up and it's rated @ 1,036 RMS. I have a R500-1 Prime Rockford Fosgate amp laying. Do you think it would be a good idea to hook up he Rockford Fosgate amp and then I would have about 1500 Watts for the Q. On the website it says the Q is 1500 RMS sub.
-
I was looking at the Q or BTL because I am possible getting another DX1000.1 in the future.
-
What is everyone's thoughts on the Fi Subwoofers. I'm looking into getting a 15" Q or maybe a BTL for my DX1000.1(2011 model)
DC Price Reqest Thread
in DC Sound Lab - Big Bass on ANOTHER LEVEL!
Posted
Price on 2 12" Level 3's and level 4's
Shipped: 48179