Jump to content

GS300Cali93

Members
  • Posts

    176
  • Joined

  • Last visited

Posts posted by GS300Cali93

  1. 8ga direct connect is just that. Direct connect instead of push terminals

    AR cone is a Kevlar cone with a wider surround

    Spider upgrade: "Stiffer suspension helps with reaching the mechanical limit, but of course there are trade offs. A big one - a higher Fs. Extra spiders when spaced or stacked enough will also help with coil rock. Bottom line - just adding spiders is just like any other "solution". It is not always the best idea, but it can help in many situations. Depends on what you are trying to achieve".

    XL softies upgrades coil and spiders to XL sub parts.

    Planning on running 1ohm or .05ohm with the dual one ohm on one 18

    I just don't know what spider upgrade that I should get still somewhat of a beginner when it comes to this stuff lol

    If your a beginner dont run at .5

    Ok should I run 1ohm or just 2ohm

    And do you know about spider stuff if I just run with 2ohm which application should I choose and with 1ohm with application would be best?

  2. 8ga direct connect is just that. Direct connect instead of push terminals

    AR cone is a Kevlar cone with a wider surround

    Spider upgrade: "Stiffer suspension helps with reaching the mechanical limit, but of course there are trade offs. A big one - a higher Fs. Extra spiders when spaced or stacked enough will also help with coil rock. Bottom line - just adding spiders is just like any other "solution". It is not always the best idea, but it can help in many situations. Depends on what you are trying to achieve".

    XL softies upgrades coil and spiders to XL sub parts.

    Planning on running 1ohm or .05ohm with the dual one ohm on one 18

    I just don't know what spider upgrade that I should get still somewhat of a beginner when it comes to this stuff lol

  3. I do not recommend isolators in any car audio install, unless you are going to be running the system with the vehicle off and just pulling from the battery bank. Even then it is not necessary. Is it going to hurt running one...... No not really. You will drop a little voltage going through the isolator and it will cost some $$$, but if that is ok with you then run one.

    As far as your application it will not hurt the batteries at all to not use an isolator. Different sizes of the same batteries doesn't matter and will not hurt the batteries. There are many installs where you can only get a D1200 under the hood, but you can load up the D3100 in the back. It will not hurt the D1200 to do it like that.

    Ok so I've read some of this thread and I'm planning on adding a second battery has a question I read online that both batterys should be of the same age what does that actually mean I have a yellow top main battery and I'm planning on putting in a kintek 2400 battery for secondary it is not new buying from somebody is that going to be a problem? Thanks for the help
×
×
  • Create New...