Jump to content

AP Zoutes

Members
 View Profile  See their activity

  • Posts

    928

  • Joined

  • Last visited

 Content Type 

Posts posted by AP Zoutes

  2. Help With Box Plans

    in Subwoofers / Enclosures

    Posted · Edited by AP Zoutes

    if you were to run a slot port all the way across the back of the enclosure your may have noise probs. you would have a 45" x 3.5" port. I've been told to do ports in a 3 to 1 or 2 to 1 ratio. so a 160 sq" port (roughly) would be 18" x 9"

  5. Help With Box Plans

    in Subwoofers / Enclosures

    Posted

    Fi website says 5-10 ft3 per 18". Then you need 16 sq" of port per ft3. Once you know roughly how much net enclosure space you will have you can start figuring the lenght of the port for your desired frequency. Your fist thing to do is figure exactly how much of your cargo area you want to take up then measure that space. Take your measurement from that and subtract the thickness of MDF you want to use. probably double 3/4" on every wall and your floor and your baffle. Tehn you have your internal air space. Then subtract woofer and port displacement and you have your net ft3

  14. Operation Door Panels.

    in Member Rides & Builds -- Show off your whip, Show off your System!

    Posted · Edited by AP Zoutes

    now I have to figuire out where I'm going to place my 2nd tweeter at..thinking about moving them to the a pillars...

    2 in each a pillar...since I doubt i can fit 2 of them in each sail panel where my existing tweeters are...without some heavy modding. And I'm not sure if i'd like them in the door panels e

    Here's and Idea for your tweeters and should give a great front stage. Place main tweeters in the kickpanels and aim them at the dome light. Then install second set in A pillars with -3 to -6 db setting (have to play with until you like). Makes a very spacious front stage and places all the images way above the dash. That's what I'm doing and it's a suggestion.

  18. 1 Ohm

    in Amplifiers

    Posted

    This is kinda on topic here... If i "strap" two Kx1200.1 amps together do i get 1200x2 at 1ohm or 1200x2 at 2ohms?

    Matters on what ohm load the speakers are wired to. If your subs are wired to 2 ohms then you will have 2400 x1 at 2 ohms. but each amp will be 1200 @ 1.

×
×
  • Create New...