Search the Community
Showing results for tags 'bus bar'.
Found 2 results
Hey guys, just want you opinion before I purchase this. I want to make my setup look cleaner. This should also make my installs go much easier as well. Was thinking about mounting somewhere in the trunk. Do you think this would work? I will have (2) Q2200.1's, (1) Q4-120, and a Kenwood XR400-4 coming off it. Will have all my batteries in parallel off this as well (total of 4 batteries). What do you guys think? http://www.amazon.com/gp/product/B00GJUZUMI/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=A1NZSGX8D9PVM7 Thanks
Hey guys, I'm a noob on the rise (at least I like to think), but I've never run over 2K watts RMS in any of my systems, until now. I currently am running a Q2200.1 and a Kenwood Excelon XR400-4. I just bought and received a SoundQubed Q4-120, 4 AudioQue 6x9's, and a set of SQ's SuperTweets. I haven't installed any of the new gear yet, but I would like to install a set of the 6x9's for a little added mid bass and the SuperTweets for sure. As far as installed speakers, I have (2) SoundQubed HDS3 12's, Pair of Infinity Kappa 6.5 components, and a pair of Kappa 6x9's. My goal is to buy another Q2200.1 and strap it to my existing. I want to run a pair of HDC3 12's and push them to their max. I know I will need availability to 400amps just for those two amps. Now add in my Kenwood (which is probably another 70amps) and if I install the SoundQubed Q4-120 which is 80amps, I will definitely need a second run of 1/0. Sorry for the long post, but I want to be thorough upfront... As far as electrical is concerned now, I have a MechMan 240amp HO alt and (3) H6 AutoZone Platinum's with around 210amp hours, that are holding up excellent so far. I have one run of 1/0 from the front battery to the (2) rear batteries. My question is, would it be best to fabricate some sort of bus bar out of 1/4"x2" flat bar and make all connections there with a second run of 1/0 from front to back? Or just do another run of 1/0 from front to rear battery bank and call it good? Also, do I need to do second runs of 1/0 on the batteries to keep them in a parallel configuration (run another set of 1/0 wires from + to + and - to - ?) Any help with my wiring will be greatly appreciated! I need my wiring to be spot on as all you guys know. If I do this, I will have over 5500RMS and I would like to know if everything is safe. Thanks and once again, sorry for the long ass post!