Search the Community
Showing results for tags 'opel'.
Found 3 results
Finally started a new project im my "new" car! 1998 Omega B My plan is to keep building a bit over the winter and spring to get ready for next years car and car audio meets/competitions. This Isn't an spl oriented build as I want it to play low and awesome with a clear front stage, but I'll still do my best with what I end up getting. I'll be participating at least What I get as far as equippment will be revealed as I get it. I have a plan, but I might change my mind so I won't say anything just yet! What I am clear on so far is that I'm rebuilding my front doors, and that's where I'll start this project. The doors will house two 6.5"s each and I'll have a pair of tweets in either the a-pillars or in stock location if it'll fit. To begin with I'll see if my Tang Band speakers might work in a car, so you'll se those in the pics. So lets get to building This is what I have to work with Behind the panel and plastic Teardown ¨ Theese are the different parts the doors consists of, partly screwed and glued The glue was sto strong so I couldn't just pull the old fabric off On the bright side the resin etc. should get a good grip on this, might drill a few holes as well Theese are the parts I'll be altering, the rest will be left stock After I have my plan of attack, I'll get to making some speaker "rings" Made a little sketchup drawing to figure out my dimentions I spent som time making the first piece When it's done I'll use it as a template to make the others. This is much easier with the right tools so I made my own little thrown together router table Then I made the ruff cuts Put on some double sided tape Then let the flush trim bit do it's job Theese will be the outer rings. I used a rabbeting bit to get my desired inner diameter This is how they ended up with a little 45 for good looks 45'd the rear of the speaker holes Done, just need to be glued together Checking fitment The depth is alowing me to add some sort of speaker grille Just enough clearance for vinyl http://i1088.photobucket.com/albums/i326/Sondre_Tveit/Stereo/20140905_155205_zpsepgts3sx.jpg That's all I have for now! There will be updates as I make progress
So, my friend own's this car, I have only done these videos. Please tell me your opinion about the videos. There is also few videos of my KIA Sorento in my youtube channel, check them out too if you like. E: Also feel free to ask anything about this car if you want.
didn't know where to post but anyway ok I have a Opel Astra 2000 A.K.A Holden Astra anyway a General Motors I was installing just a 12" in the back as it is my daily driver so I disconnect the batter like I do in all my installs better safe than sorry so anyway I think the disconnection of the battery triggered the TPS (throttle position sensor) which I was later told it could be all the symptom show the same. Symptoms: when you put you put foot down there is a definite lag I'm talking 2 seconds nothing happens increase RPM for acceleration it goes all slow when revs are pretty high like 4-5k fuel economy is real bad uses way more guessing because increased revs or a oxygen sensor just posting seeing if anyone has any other idea what it could be or had the same issues that got resolved all help is greatly appreciated