Wantin2DropCheap Posted March 24, 2018 Author Report Share Posted March 24, 2018 damn guys tried to upload pics but it will only let me upload 0.59 pics are 6mb? Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Thank you all so much. I really appreciate all the help. Tuned to 29 and it hits stupid low and way harder than I could have imagined. This beats anything I have ever had as far as lows go. It puts the rearview mirror straight down at the dash and I get a good amount of flex. My windshield has started leaking now but I couldn't be happier. Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Now that I can post pics I'll show you guys the internals. I did the window bracing and I chose sewer pipe for the ports Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Double floor and double top. That way I could recess the sub faces which you will see later. I screwed liquid nailed and caulked everything. I even bolted the windows in and used locknuts and red locktite and then hack sawed the ends and ground off the excess Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Here I used expanding foam to seal off the gaps under the ports. I then trimmed that with a razor and caulked it in Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Probably overkill here but I used the gold post connectors between each box. I used locknuts lock washers and red locktite on all posts as well as caulk in the box wall hole before assembly. These would probably need torched out haha Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Filled and sanded 2 boxes worth of screw holes on all sides Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Painted speaker area black since I would not be doing the bedliner inside here. It was a snug fit Link to comment Share on other sites More sharing options...
Wantin2DropCheap Posted December 31, 2018 Author Report Share Posted December 31, 2018 Stuck the Chevy emblem American flag with red stripe to match box and frog tape for my stripe on. I just bombed the red because my frog tape which was leveled and measured twice would define my stripe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.