Please Help Meca Class What Class Will I Be In

[BassBoy69]

Find the point at which you DON'T pop the fuse and don't play higher than that.

You can use the 40A if you know where to set your volume.

id pop it fast, for sure,, that would put me at 876 = as-2 class, maxx is 1000

id like to do as2, but it says i can use 2 fuses

if i use 1-50 x 10 + 476 = 976, just under the 1000 limit for as-2

but i can use 2 fuses, so does that mean i can run 2 fuses holders inline next to the amp both with 50 amp fuses in them ?

Edited February 12, 2009 by BassBoy69

[BassBoy69]

o shit i think i tottaly mis read your messages wrong,

I have to do this, tell me this is right..

78.53982 = 1 -10" subwoofer thats what meca says a round 10" is.

90 amp fuse x 10 = 900 + 78.53982 = 978.53982 ?

978 out of a max of 1000 allowed in as2 class

Edited February 12, 2009 by BassBoy69

[RHoughton1]

o shit i think i tottaly mis read your messages wrong,

I have to do this, tell me this is right..

78.53982 = 1 -10" subwoofer thats what meca says a round 10" is.

90 amp fuse x 10 = 900 + 78.53982 = 978.53982 ?

978 out of a max of 1000 allowed in as2 class

yes that is correct,,,BTW try to keep your fuses as even as possible like a 50 amp and a 40 amp

[BassBoy69]

yes that is correct,,,BTW try to keep your fuses as even as possible like a 50 amp and a 40 amp

ok so to make sure i can run 2 different size fuses and = 90 amps,

but ill have my main power wire go into fuse holder #1 with 1-50 amp, and then 4 inches of new wire leading into fuse holder #2, with a 40 amp in it,, exiting out with a few extra inches into the amp?