TeejayBee Posted January 22, 2010 Report Share Posted January 22, 2010 So i was wondering if there is a way to wire 4 ohm comp set down to 2ohm i want to run Two sets of 5.25 in kicker ks comps and and if i can run it off a 250.2 id like that and have the left side wired down to 2 ohm and the same on the right any help? Quote Link to comment Share on other sites More sharing options...
95_1500 Posted January 22, 2010 Report Share Posted January 22, 2010 You have 2 sets correct? Wire two speakers parallel on each channel and each channel left and right will see a 2 ohm load Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095 Link to comment Share on other sites More sharing options...
TeejayBee Posted January 22, 2010 Author Report Share Posted January 22, 2010 So its just like wiring a two subs with single coils ? Quote Link to comment Share on other sites More sharing options...
TeejayBee Posted January 22, 2010 Author Report Share Posted January 22, 2010 So its like this lol Tweeter(1) Pos to Tweeter(2) pos same with neg. then to the same xover? and same for the 5" woofers and put them on the same xover? Quote Link to comment Share on other sites More sharing options...
95_1500 Posted January 22, 2010 Report Share Posted January 22, 2010 So its like this lolTweeter(1) Pos to Tweeter(2) pos same with neg. then to the same xover? and same for the 5" woofers and put them on the same xover? Run from tweeter to crossover, from speaker to crossover, for each comp set... then from the crossovers to the amp wire two crossovers in parallel at the amp Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095 Link to comment Share on other sites More sharing options...
TeejayBee Posted January 22, 2010 Author Report Share Posted January 22, 2010 haha ima need a pic like i tell everyone ima visual person xD to under stand this sorry if you can thanks Quote Link to comment Share on other sites More sharing options...
95_1500 Posted January 22, 2010 Report Share Posted January 22, 2010 Its kinda small... screen shot with dual monitors FTL right click save as, open with windows picture viewer or w/e and zoom in to read it.. basically wire everything like you normally would, but connect + to + and - to - from two different wires that go from the crossovers to the amp in the amp terminals Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095 Link to comment Share on other sites More sharing options...
TeejayBee Posted January 23, 2010 Author Report Share Posted January 23, 2010 alright i belive ive got it now haha ill pm when i get them if i still need help Quote Link to comment Share on other sites More sharing options...
TeejayBee Posted January 23, 2010 Author Report Share Posted January 23, 2010 http://kicker.com/sites/default/files/2008...04in1%20b01.pdf look at page 4 that diagram if im correct? Quote Link to comment Share on other sites More sharing options...
95_1500 Posted January 23, 2010 Report Share Posted January 23, 2010 (edited) http://kicker.com/sites/default/files/2008...04in1%20b01.pdflook at page 4 that diagram if im correct? Yeah thats right Connect everything just like that, then once its all in run your wires from each crossover to where the amp is. Then now is where you will wire it like you were wiring two SVC subs. You have two wires for each side (2 + and 2 -) which will get connected in parallel and inserted into the corresponding channel (both left side + wires go into the left channel + and both left side - go into the left channel -) Then repeat for right side sets edit: looked at the wrong page Edited January 23, 2010 by 95_1500 Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.