4 Ascendant SMD 18's, 36kwrms!! - teamSPB Project D*FN U...NEW UPDATES! 9kwrms PER SMD!!

[teamSPB]

Door build Version 1...the temp ones!

The last midrange and pair of tweeters went in this handy spot

teamSPB

[teamSPB]

Dash builds and tweeter builds were then flocked

teamSPB

[teamSPB]

And the temp gash looking vynil job just so I didnt have to look at bare MDF/FG/Filler all the time lol

teamSPB

[2fibtl15s6000watts]

wow..I caught myself daydreaming of your box and those LEDs

i did the same thing

[teamSPB]

Heres a quick vid of the mids running no low pass filter on the temp door builds...

Version 2 door builds coming up!

teamSPB

[teamSPB]

Door builds Version 2!

Now that we know the mids would work the way we wanted them to...I decided to work on a new layout for the doors as I wasnt happy with the rush job I did on the last...

The tweeter builds will remain, but the bottom section of the door card will change...moving 1 midrange from the door to the kick panels...you will see why this was done a bit later...

1 Router bit and LOTS of saw dust later...I was left with this...

Port anyone?! LOL

Time to recess the midrange

Lots of recessing later

A few different layouts were considered...this was the initial one I was going for...

With the above, I was going to have an Ascendant logo in the middle kinda like their 'badge' logo...but decided against it...

This layout was then agreed upon...

Wrapped up...

At this point I wasnt really happy with the desgn and keeping the empty space...The original AA logo idea came back to mind...

teamSPB

[teamSPB]

I wasnt happy with the last design (again!), so I wanted something else to fill in the little gap...

Make a cardboard template

Draw onto wood

Cut out

Et Voila!

Time to wrap

One last test fit

Then they were resined!

teamSPB

[justinadams]

i so want to steal this. if only i was near you.

[teamSPB]

i so want to steal this. if only i was near you.

haha...I dont think me, or the people who are near the vehicle would make it very easy LOL!

teamSPB

[teamSPB]

Door builds Version 2.0

Resined and strengthened with matting

For the little 'blank' area, I decided to put a logo there...Initial plans were for a AA logo...

Some sanding later

Test fitting

After a while of thought and putting a few logo ideas down...the AA idea changed into a SPB idea!

These were then flocked!

teamSPB