1LoudCelica Posted August 5, 2008 Report Share Posted August 5, 2008 Stetsom TH4120 4 Channel - 200 shipped+pp fees. 4 channel specs: Channels - 4 Potency PMPO - 1800W RMS Power @ 13.8V STEREO 4 Ohms - 4 x 80W STEREO 2 Ohms - 4 x 120W BRIDGE 4 Ohms - 2 x 240W Consumption - 0,6 to 56A Input Tension - 13,8V Frequency Response - 15Hz to 50KHz Signal to Noise - > 90 dB / Input Sensitivity - 0,2 to 6V Total Harmonic Distortion - < 0,2% / Input Impedance - 50 K Ohms Output Impedance STEREO - 2 Ohms / Output Impedance BRIDGE - 4 Ohms Damping Factor - > 400 Lo Pass - 40 to 700Hz Hi Pass - 70 to 700Hz Dimensions - 45 x 240 x 422 mm Weight - 3,6 Kg PICS: 4 Channel, pic is from previous owner, item is mint: Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 6, 2008 Author Report Share Posted August 6, 2008 fresh bump for peeps, let's get this sold guys. Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 6, 2008 Author Report Share Posted August 6, 2008 feel free to make offers guys, I need cash right now. Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 7, 2008 Author Report Share Posted August 7, 2008 to the top Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 7, 2008 Author Report Share Posted August 7, 2008 come on guys, need this gone. Link to comment Share on other sites More sharing options...
BassJunkie Posted August 9, 2008 Report Share Posted August 9, 2008 YGPM 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 9, 2008 Author Report Share Posted August 9, 2008 YGPM can't go any lower than what I was asking bro. Link to comment Share on other sites More sharing options...
EricR Posted August 14, 2008 Report Share Posted August 14, 2008 interested in any trades? i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
Recommended Posts