GLN305

Sounds good, expect to hear from me soon on the 270 amp alt. Thanks!

I am looking for either a replacement alt or a conversion kit to allow me to run a large case alt in my car. There looks like plenty of room for a large case, I hope you make a kit. I want the most current I can get out of a single alternator. I have 4/0 wire to run from the alt to the batt as well as multiple 1/0 ground upgrades in most places. Can you give me some prices on both the stock case solutions as well as the large case solution if you offer that? Thanks! 2006 Dodge Magnum R/T 5.7L Hemi

I may only be able to fit a single CandD batt in there, we'll see, I want both though LOL.

I squeezed the most airspace out that I could...10 cubes NET after port and sub displacement.

Thanks! Gonna be running the big C and D tech batts, Kinetik 3800 equivalent x 2 along with a red top under the hood.

Face is on the box and the port is painted.

I talked to DJ at Audioque and the 3500 was what he said I should run. I may get another and run them at .5 later

Pink comforter was the wife's choice for the extra bedroom

Thanks! I beat myself up trying to do the best I can. For some reason perfection is my goal even though it's unattainable. I hope I get some good numbers out of this setup!

Victim: 2008 Chevy Colorado Equipment: Two HDC3 18's, AQ 3500D, AQ 4x90, Hertz HSK163 and a couple batteries. Here are some pics of what I did when I first got the truck: I have about 200 square feet of deadener, 4 yards of acoustic foam and a few hundred zip ties and mounts along with many feet of Techflex. Here are some progress pics of the enclosure. 3/4" Birch ply, 1 1/4" wooden dowels and the SMD patented 45 in the port. 10 cubic feet NET tuned to 35Hz

Got off my butt and bought a Porter Cable circular saw...I'm gonna get back on this in the next three days.

the whole wall can be built outside and slide in with ease. I have test fit the box without the front and it's fitting well.

When there is more to take pics of you will have them LOL. Expect some on Thursday...gotta drive 1/2 way to Houston tomorrow evening! I just realized that you are from Houston and I am driving there to trade a PS3 for a Hertz component set just like you are running. You wouldn't happen to be krouchchocolate on CA.com? LOL

Slow progress Too hot to work in garage, it was well over 110 degrees in there with the doors open and the fans blowing!

I had a feeling that port on the driver's side would be the best for SPL, I think I may put it there....either spot is the same amount of work, might as well make it meter well too! Thanks!