loburbon

ok where do i start, i dont suck at designing boxes or do i suck at building them. the box is 6.2cuft after displacements with 130sqin of port area. 28.75in deep for a tuning of 35hz. its sub up port to the driver side. also its m3's not m1's. and a 146 with 1 sub off 1 amp in the cargo area non wall is loud either way you look at it. this is the first box i've built in any of my vehicles that hasn't done a 150+ and i design all my boxes. and i know this about resin and 45's, i was just making that point up front because thats one of the first thing every one asks.

everything was wired right. i've been talkin with super steve from dd and he said the box was capped???????? i havent put any 45's in the box yet. nor have i resined the inside. he also said the paper cone on the 9500's were a weak point when you put that much power to them

ok heres the deal. i have a single dd 9518. i had 1 m3 on it at 1ohm. i did a 146.6@45hz. then i strapped 2 m3's on the sub at 1ohm. each amp seeing .5 it still did a 146.6@45hz. i'm stumped. shouldn't i see some kind of gain?

how loud are you wanting to be? the grand prix i did with two tens is fuggin loud. he does a 145@38hz on a tl

no they fit in the trunk just fine. it's getting the box into the trunk. the trunk opening is tiny. once in the trunk they have plenty of room.

you cannot fit a box for 2 15's through the trunk. i just finished my friends install for his 01 grand prix and it was for a pair of tens. and it barely fit. you can build it in the trunk if you want. and if your grand prix is like his then the seats dont fold down

nice bro. its always nice to see a grown man squell like a pig.lol