Jump to content

Team Maf

Members
  • Posts

    166
  • Joined

  • Last visited

Posts posted by Team Maf

  1. Please check coverage areas before you sign up with boost..I had many issues with their "orthodox" service.

    1. Upon activating phone, you may have to physically call boost mobile to setup your plan.

    2. A 24-72hour duration may occur before you can officially use texting services on your phone upon activating, and you will be charged for that plan accordingly(if you have a daily plan etc.) regardless during your activation period.

    3.Depending on service location, Phone may or may not receive/send text messages corectly. I.e Receiving/sending text messages hours later after they were dispatched.(even days in my case)

    I had a lot of trouble, along with horrible signal in my area. Be aware!

  2. I have a rockford t1000-1bd that was rated at 1380 at 1ohm 14, running my 15" Q with BP softparts in a 3.4ft^3 box... all gains set with an oscope... slightly clipped. And when I'm really wanging on it after about 3minutes I can start to smell the sub heating up pretty good. I also have a powermaster alternator and a yellow top... with those my voltage sites at about 13.8-14.2 when wanging on it.

    With that being said... I wouldn't put much over 1200-1300 to a Q.

    Well with that being said, I'm wired for that but that dont mean I see it all the time..I don't push it hard at all now considering the box I have mine in :censored:

  3. im not saying to turn the gain UP. im saying to turn the gain down. yes the gain knob is used to match the preout voltage on the headunit, but if you turn the gain down on the amp, you can control how much power you want out of the amp (meaning if you dont go into clipping by turning the knob up).

    lets say you have a 4000rms amp and your sub can only take 1500rms. you turn the gain down from your amp to output LESS power.

    "Dear Krannyman92:

    NOPPPE NOPPPE...See when i have my gain up it does nothing to the signal from the cdplayer. So if i have the gain dial all the way up...and try for max volume bah may amp cuts out.and duh fuses blow..but if i have it down about a quarter turn I can play it all the way at 50 and its running clean...?!?!?!?! How'd this happen. I can obviously tell the volume is much lower the one way..but it doesnt seem loud cause the gain isnt all the way up.

    Thanks"

    Im currently running a md2d on a 15Q with BP, 1ohm...~1400w. The sub handles extremely well EXCEPT on lower tones(28-33hz) at this power. Tune away from those if your running close to 1.5k on it.

  4. i have a termlab i will sell for 450 ship with one mic but it has a power cord

    So its the ac adapter version? also is the software/case included? $450 best offer? LMK brah cause im in dire need of one.

×
×
  • Create New...