tju76
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by tju76
-
-
what do you mean the gains are backwards?
Brain fart - is + and + is -!!!!
cant believe i have been figuring this out for two days
-
When you was adjusting did your eyes make a mistake and went the wrong way thinking something else? How many beers during the process? Did your girlfriend help?
beers after haha i will triple check tomorrow guys so i can proove i am right about this one but the system sounds perfect now
- 1
-
guys im not kidding negative probe went in amp ground and positive in positive
i will upload a picture tommorrow
-
Okay it's set perfect the gains were backwards on the amp or something because I checked and rechecked with both the dmm and dd1 at clean signal 33 sub level 15, for everyone saying not to set sub level at 15 you were incorrect in regards to alpine headunits I figured this out because with sub level at 0 the max voltage the amp would see was 22 volts which 1200 watts should be 36 volts so I set sub level to 15 volume at 33 gain knob turned to what is labeled on amp as 6 volts the max and did not get distortion kept "turning down gains " until solid distortion light came on. Then hooked up dmm so I could see the volt reading instead of being 54 which is what it was with gain knob all the way down it was now at 37 so it was perfect. Double checked this and everything checked out. So thank you everyone for all the help I guess we can see why it took so long . I can't believe I figured this out I should PayPal everyone who helped a gift
-
Guys I think I solved it give it minute so I can explain haha
-
I can't explain that except the gain is backwords it appears
-
-
Where are you taking the reading?Okay guys I just used the multi meter on the amp 29 volume gain all the way down shows like 36 volts which is not correct it should be lower like 6 etc now the very interesting part is when I turn gain up voltage decreases so at max gain volume 29 it is showing less than 6 volts I can take pics bc I doubt anyone will believe me
Taking reading from sub I'm not lying the voltage decreases at max gain it's like its reversed is that possible I can take a pic hold on
-
Your fucking kidding me that worked let me try gains and see if I can get a constant signal
-
Okay guys I just used the multi meter on the amp 29 volume gain all the way down shows like 36 volts which is not correct it should be lower like 6 etc now the very interesting part is when I turn gain up voltage decreases so at max gain volume 29 it is showing less than 6 volts I can take pics bc I doubt anyone will believe me
-
I'm located in New Hampshire
-
So what should I do next I set the gains exactly how everyone said. If I am correct should my sub out be putting out a 4 volt signal at 0 like you said because nobody listened to me when I said that from everything I read plus 15 for alpine head units in fact means it is a 4 volt signal it is not boosted above that. Because with gains set how you guys said my clean signal is 29 amp gain at half and the thing is not pulling any power. My question is do I want my sub out at a 4 volt signal
-
-
-
Give me a sec
-
They had to have changed the manual bc I can't find an updated one online it says it for all the settings plug black in negative speaker
-
Can I upload pics I will find a link
-
You are doing this with track playing and deck volume at 35 correct?
Yes still no signal
-
That is not what my book reads and I did it your way and no signal
-
Poked the black probe into amp ground jacket positive hooked into speaker positive no signal still connect ions are all tight the book says use negative speaker out but I do believe you guys why is not showing a signal
-
For setting the gain of a subwoofer amplifier it reads connect red probe to speaker positive connect the black to speaker negative I tried putting the probe in my amp negative and the dd1 would not get a signal so I would say it's supposed to go in the negative speaker
-
My dd1 did not come with a clamp just the probes I loosened the ground and put the probe in but the dd1 did not show a signal
-
My dd1 did not come with a clamp just the probes
-
Let me ask. Did you hook the Positive probe on speaker + and ground clip on the battery negative. Right?
It says to use the negative speaker terminal. The only way I can put it in the amps negative is by taking out the amp ground is this what you mean for me to do ?
problem with dd1
in SMD Distortion Detector (DD-1) Topics
Posted
Oh that makes a lot of sense now I didn't even think to look at that I just assumed .2v was the min thank you for explaining