JustinT
-
Posts
810 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by JustinT
-
-
Still does it on the iphone, though it was still slightly louder. Excursion only get to about 3/8" - 1/2" before it starts. Could it be something to do with current draw? But my voltage doesn't drop down?
Also what will happen if you don't back down on the knob/volume is that the amp will go into protection mode or something and the subs will make this slow rhythmic chirping sound. But when this happens the protection light doesn't come on, but the power light dims and brightens with the same rhythm.
What is going on? Does this sound familiar to anyone?
-
Got any other decks you could try, i had a deck do that... was fine at low volume... turn it up and subs would go crazu
No other decks. I could probably play straight from my iphone but it probably wouldn't play much at all because itis most likely a very low voltage output.
-
Did you try playing it without the bass knob?
Yeah. I even tried switching to my new Sundown knob and still to no avail.
-
For some reason my Fi's are no where near what they used to be. Now when I turn my bass knob up just a little bit, something in the system freaks out and the subs react chaotically. It doesn't even seem like it is clipping or anything. The subs will be playing at a nice sine wave at low power and then I'll turn it a little more and it freaks out.
Today I:
Tried playing some sine waves to see if it were from the songs I have been playing but it still did the same thing.
Tried it without the knob and used the volume for bass...same thing
Adjusted the gain...still the same at 1/4 gain
Checked the coils...they're fine
All the connections are good too
I don't what the problem is And if I can't figure it out I might sell everything because I could use the $.
If anyone could help I would Greatly appreciate it.
-
What about color matching your rims in this way?
Sick IMO
-
I don't understand...Is there a reason at all that anyone doesn't go with Sundown?
-
-
Just paid for the 125.2 :tease:
-
I'll be there Darrell, with a fully working stereo this time. I'm boutsta win me some monies! :tease:
-
why not 3 15's...
sexy ass ports too. why is one smaller than the other though
Thats alot more $ for Btls and power for them, plus better electrical
That pics is from the guys website I haven't bought them yet...still designing.
x2. those are badass! where did u get em? how much?i think u might be good with the 70 sq in...
http://www.subwoofer-builder.com/flares-for-sale.htm
Thats is Australian dollars
Shipping is upwards of $100 though from Austarlia
why couldnt u use 2 ports for the 15s?They would be about 40 inches long
-
-
Well my mojos are starting to suck...blew a coil actually. And now its time to upgrade to BTLs
I'm stuck between 2 15s or 2 18s
Here is the scenario:
The ports will be outside the box.
I am going to use these ports...
Deal Breaker for 15s: the only practical option is to use 1 of those ports for 8 cubes
Fi recommends 12 - 16 square inches of port per cube
8cuft x 12 = 96
8cuft x 16 = 144
So about 96-144 sq inches recommended.
that port is only 70 sq in.
Would that be a problem?
Deal Breaker for 18s: The only problem for the 18s (using 2 of these ports) is that the box would simply be too long to conventionally mount the ports outside the box...
So to still be able to show off those peerrrty port flares, I was going to mount half of them inside the box and the other halves outside the box with the joiner PVC glued into the side of the box.
My problem with this is that the inside port flare is going to be about 12 inches inside the box rather than flush with the wood like the 15s would be.
Is this going to pose a problem with the function of the ports?
So...15s or 18s?
-
Imma be there. thats 2 mins up 45
-
maybe your subsonic is too high. Mine would make a pop sound when some bass notes.
-
and did u loose the allen heads, its looks like u have screws going in here...
not a good connection bro... u want to smash the wire down and create alot of surface area of contact, not pin it in place with a screw
They aren't allen head bolts. They use a phillips head. thats the way they came.
You have the sub wired up right bro.
Just a suggestion, If you don't have your remote gain knob hooked up, do that now. Then play with it a lil and see what happens.
-
I put resin arcs in my box...seems like it would help more over just 45's.
-
Hey Jacob,
I was just wanting to send you a pm seeing if you got my payment for the 3500 but it was full. Should be from [email protected].
Also wondering some of the criteria for joining your team as well.
One last thing, I hope that two of these will fit in the speaker outputs on the amp, the bridged ones I guess.
Yeah 4awg is quite large for speaker wire but each wire is going to be split up into 4 8awg wires.
Just send me a PM mayne
Thanks Jake.
-
So this amp would be decent for a set of Hertz Hi Energy components?
-
I'm about to send over the payment later today.
If my creditcard is connected to my paypal, I can still send funds over if the actual $ isn't in the paypal?
-
will it be stable at .5 ohm daily with 300a alt S3400 and D3100. dual DCs alts in the future.
Thats the deal breaker for me
-
Tahoe front clip with a Blacked out GMC on the front...FTW
-
those meters aren't very accurate
-
Just copped that shizz
-
zeitgeistmovie.com
watch the whole thing
Problem with my SAZ3500
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted · Edited by JustinT
I'll check both tomorrow after work. Again I appreciate the advice.