JustinT

I'll check both tomorrow after work. Again I appreciate the advice.

Still does it on the iphone, though it was still slightly louder. Excursion only get to about 3/8" - 1/2" before it starts. Could it be something to do with current draw? But my voltage doesn't drop down? Also what will happen if you don't back down on the knob/volume is that the amp will go into protection mode or something and the subs will make this slow rhythmic chirping sound. But when this happens the protection light doesn't come on, but the power light dims and brightens with the same rhythm. What is going on? Does this sound familiar to anyone?

No other decks. I could probably play straight from my iphone but it probably wouldn't play much at all because itis most likely a very low voltage output.

Yeah. I even tried switching to my new Sundown knob and still to no avail.

For some reason my Fi's are no where near what they used to be. Now when I turn my bass knob up just a little bit, something in the system freaks out and the subs react chaotically. It doesn't even seem like it is clipping or anything. The subs will be playing at a nice sine wave at low power and then I'll turn it a little more and it freaks out. Today I: Tried playing some sine waves to see if it were from the songs I have been playing but it still did the same thing. Tried it without the knob and used the volume for bass...same thing Adjusted the gain...still the same at 1/4 gain Checked the coils...they're fine All the connections are good too I don't what the problem is And if I can't figure it out I might sell everything because I could use the $. If anyone could help I would Greatly appreciate it.

What about color matching your rims in this way? Sick IMO

I don't understand...Is there a reason at all that anyone doesn't go with Sundown?

That...sucks

Just paid for the 125.2 :tease:

I'll be there Darrell, with a fully working stereo this time. I'm boutsta win me some monies! :tease:

Thats alot more $ for Btls and power for them, plus better electrical That pics is from the guys website I haven't bought them yet...still designing. http://www.subwoofer-builder.com/flares-for-sale.htm Thats is Australian dollars Shipping is upwards of $100 though from Austarlia They would be about 40 inches long

http://www.knukonceptz.com/productDetail.cfm?prodID=KFX0BK Nuff Said.

Well my mojos are starting to suck...blew a coil actually. And now its time to upgrade to BTLs I'm stuck between 2 15s or 2 18s Here is the scenario: The ports will be outside the box. I am going to use these ports... Deal Breaker for 15s: the only practical option is to use 1 of those ports for 8 cubes Fi recommends 12 - 16 square inches of port per cube 8cuft x 12 = 96 8cuft x 16 = 144 So about 96-144 sq inches recommended. that port is only 70 sq in. Would that be a problem? Deal Breaker for 18s: The only problem for the 18s (using 2 of these ports) is that the box would simply be too long to conventionally mount the ports outside the box... So to still be able to show off those peerrrty port flares, I was going to mount half of them inside the box and the other halves outside the box with the joiner PVC glued into the side of the box. My problem with this is that the inside port flare is going to be about 12 inches inside the box rather than flush with the wood like the 15s would be. Is this going to pose a problem with the function of the ports? So...15s or 18s?

Imma be there. thats 2 mins up 45