kbreudi

76 C is approching the danger zone for a porc. Deff invest in a good air cooling or a decent water set up. I only run intel but a buddy of mine has a 3800+ X2 that we got stable at 2.6 24/7 and 2.8 for becnhing. First thing is find out if its your ram holding you back from you over clock by lower its freq as low as you can. If you still have stock air cooling you wont be able to go very far.

Ok one problem. I wont have two alike batterys OR an isolator.

Nooo...who is the guy can he get me an alt?

I hear talk about not adding a second battery if you dont plan on upgrading the alt because it will burn it up and such, is this true? Right now i have done the big 3 in 4 awg, got a everstart in the front and 0 awg running to the distro blocks in the trunk. I just bought a kinetik HC800 to install in the rear but am worried about hurting my stock alt. Its a 98 Cadillac catera with a stock 120 amp alt. I cant seem to find ANY alts for this car so i dont plan on gettin a HO for it anytime soon. So will the second batt be a bad thing?

I got two 12" L7's ported and tuned to 38Hz in 5 cubes. A Hifonics Brutus 1606d for the subs. Then i have kicker RS components in the front (two pairs) and kicker coaxials in the rear (also two pairs) all mids and highs powered by a hifonics titan pushing about 160 x 4 rms. I have pics but im new here so i hevnt posted them. I will soon.

Just today i was at walmart driving in the parking lot with the windows down. I was playing The Light That Blinds by Shadows Fall. It starts off very soft with a slow gutar. Then like 20 sec in it gets supppper loud and suppppper heavvy and a crazzzzyyyyy fast double bass drum all within a second. When the volume was up and windows down i made literaly about 10 people JUMP while in the parking lot pushing carts or w/e they were doing. It was so funnyyy... Im gonna play this song when ever im around people i wanna scare lol

x3

Yes it is cloth, i bought it from home depot. Tomarow im gettin 9 yards of this stuff from ebay. Is it better or not? Also will any type of epoxy work, is what im usuing now ok? Thanks for the help

Ok thanks, like i said its my first build with fiberglass and any advice would be fine. Thanks guys

Yea I geuss so, what else can i do its for a 5.25" component set, does it need to be seeld or no?

Hey guys this is my first post here, i love reading your guys topics and lookin at the sweet pics you guys post. Im 18, just got my first car a few months ago. So far got two 12" L7's tuned to 38 Hz, a hifonics brutus 1600 watt mono amp, kicker components and coaxials power by a hifonics titan 700 watt amp and a JVC HU. Went to a local db drag a week ago and hit 138.4, not the best but hey my first time. So to get to the point im atempting some fiberglass kick panels for another set of components, its my first time working with fiberglass. I kinda am following a post on this forum from a member doing the same thing. Here are some pics of the work so far, please make comments and sugections. Sorry for the quality of the pics they were takin with my phone. Here is first layer, i taped up the stock pannel and then molded glass around it. Here is what it looked like after one layer. I though one layer was enough for just the mold but it wasent it was all flimsy. Here is after three more layers. Here is the speaker support. And here is it glued to the mold. Well thata all the work for today. Im gonna get some fleese tomarow and start shaping.