Fullcycle
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Fullcycle
-
-
We have the Pioneer AVH-X4600BT hooked up to the PAC TR-7 video bypass. We was thinking of purchasing a Boyo back-up camera. My question is how to get the camera to come on automatically when the car is in reverse? Are will the camera always been on till you change the source?
-
Oh. I did go with a Gate's belt, that was 7/8" smaller than stock.
-
-
I have talked with Brain @ Meckman.
(A) is ground
( is Positive
© is for testing only
(D) is to be connected to (1)
(E) is not to be used
(2) is to to be bolted on top of (
Take the (white wire) from OEM stock wiring harness and tie it back and don't use it.
Thanks again Brain
-
-
Will the sub need rear bracing? Weighing in at around 150lbs 16" deep, puts a lot of pressure on the front ring.
back-up camera wiring
in Sonic Electronix - Great Selection Great Prices
Posted
Here is how we wired the back up camera.
We took the camera RCA cord and used a RCA Y splitter. And connected one to the back up RCA on the head unit and the other to the A/V on the head unit. We connect the camera ground to the radio ground. You also need to run a wire to the reverse light up to the head units back up wire. Now we connected the camera power, to a illmanation swiitch now to a source that stays hot like the battery "NOT ACC".
You can now view the back up camera while driving forward. By just turning the head unit on A/V. And the camera will automatically still come on when you put it in reverse.
By using a switch it keeps the camera from all ways drawing power.