rhcpepper7

whats the smallest box i could make 2 ported E10s to? I would want it tuned to 32hz. max depth i can go is 21 inches....if the ports were under the 2 subs could i save room on the width? I want the width to be as short as possible and height can be whatever to accommodate. they have a rec. ported box size of 1 cubic foot each with a displacement of .11 cubic feet each. I would prefer box to have subs facing forward with the ports under subs to save on width. I really dont want width to be more then 26-28 inches. If someone could help with box design it would be greatly appreciated. Thanks for the replies so far!

So you think 2 sealed e12s would be pretty loud?(400-500rms each) Enough to shake up my jeep patriot quite a bit? I just dont want to get 2 e12s and be disapointed with the output in a sealed box then be stuck with 2 weaker subs when i could of had 1 stronger Sa that i would go ported. Thanks for the replies so far.

My bad forgot to explain a bit. I have a jeep patriot and im trying to keep atleast half the space in the back. I throw alot of stuff in there often and need the space. Ive done some measurements and 1 ported sa 12 would take up about the same space as 2 e12s sealed. trying to keep the width of the box under 28 or so inches. 2 ported e12s would take up too much room.

Cant decide which setup to go for. I want to get loud, but also want to have a really tight sound. Im thinking either two e12 d2 sundown subs sealed. So sealed but having double the cone area. Would this setup get pretty loud and sound good? or 1 Sa 12 d4 sub ported to 32 hz and 2 cubes. Planning on buying a Hifonics brutus brx 1100.1d to power either setup. Would the single ported sa 12 be louder then the dual e12s sealed? Thanks for any feedback.