Jump to content

Welcome to the SMD forum!

Splecc

Members
  • Content Count

    18
  • Joined

  • Last visited

Community Reputation

2 Neutral

About Splecc

  • Rank
    120db

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Got my active crossover lpf set to 55hz, subsonic is @28hz. Im beginning to think, that these rf subs werent that gr8 after all.
  2. So everyone in the world can go with sd8k and i cant? What kind of logic is that?
  3. Another one bites the dust. This time the coil slinkyd. Could i have the box wrong or something?
  4. So... coil is still all good, what failed during playing, was the basket itself.
  5. Bro, i cant say no to extra of double xmax both ways. He said that the cone and surround will be from dd3515, not sc, my bad.
  6. These are my only subs at the moment, one sub is about half my months pay so i really cant put them behind the glass just to look at them. Sent the woofer to Latvia, to a firm/guy called Nartaudio. He handmakes the coils, coils take up to 400c in temp. Going with a diffrent basket, not a ti basket unfortunately, just because the other option was 60€ cheaper. The new basket is some kind of chinesesium made, but he did tell me that they are as strong as a ti basket and would allow as much xmax as a ti basket. Theres gonna be 10" spiders, woven with triple leads, digital designs supercharged surround and cone with the original RF dustcap just for shits and giggles. Projected fs around 30ish and he's gonna measure all the t/s parameters for me.
  7. The recone guy asked if i wanted to change the basket to something else with 10" spiders and other top notch stuff. Im gonna go for yea on this on.
  8. Aaaaaand its blown gonna send it for a recone. Should i go with 15"ti basket instead of the original or not? Why?
  9. Got it in, still gonna need to install the active subwoofer crosseover, the crossover on the sd is pretty much useless. Sounds atleast the same and goes waaaaaay lower. Gonna start calculating the spl box aswell. Box rise is a bitch and still getting maximum of 3,5kw to it, wired tp 0.7 ohms and rises to 2,[email protected] 34hz and rising to 6,[email protected]
  10. Got it in, still gonna need to install the active subwoofer crosseover, the crossover on the sd is pretty much useless. Sounds atleast the same and goes waaaaaay lower. Gonna start calculating the spl box aswell.
  11. As you can see, i dont have a workshop or anything. Im limited by weather and its a bit*h out here in baltics.
  12. It wasnt a prefab. It was originally made by some1 for one of them. I got the second one a month later and just threw it in.
  13. I made one...gonne see what it sounds like tomorrow.
  14. For spl same box with 15cm port would make the tune about 52hz. Would it be anygood?
×
×
  • Create New...