ninjajack

I have one last question on this. Since I am still using the stock head unit and I had to use the PAC Ampro to integrate, is there anything I need to do to the ampro before I begin setting gains? Or can I leave it as it is set right now already in my truck? Thanks for the help.

thanks for explaining that in more detail. I did go ahead and purchase the DD-1+ and look forward to tuning my system the right way.

Thanks for the reply. So your instructions are for the amp, correct? Don't you need to find the distortion limit of the head unit before you set the amps? Since my head unit is stock, I was just trying to figure how to do that.

I am considering buying the DD-1+ to help tune my 2015 Ram 3500. It has the Alpine stock system that I used the PAC Ampro to integrate my system into. My question is, does the DD-1+ work with the stock head unit? Can you explain how I would do that using the DD-1+? Right now I have RF T600-4 running 2 sets of Focal components and RF T500 running one JL Audio 12W6. I am in the process of upgrading to 2 12W6's and swapping out the T500 for a JL Audio slash 1200/1 and I will also be adding a TwK-88. I will probably upgrade the T600-4 as well while I'm at it. Also, I noticed that the PAC Ampro has a TOSlink port. Can I use this for my JL Audio Twk-88 to get the best signal? Thanks for you help