Jump to content

Joshk

Members
  • Posts

    5
  • Joined

  • Last visited

About Joshk

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Joshk's Achievements

Apprentice

Apprentice (3/14)

  • One Month Later Rare
  • Week One Done Rare
  • Dedicated Rare
  • First Post Rare
  • Conversation Starter Rare

Recent Badges

0

Reputation

  1. Sundown is top quality you can't go wrong at all it's one of my favorites, not budget friendly. if you're on budget I would go with taramps. I've ran skar I've ran taramps I've run Rockford pioneer Zeus Hifonics as far as budget goes taramps is destroying them all. Excluding rockford fosgate
  2. Im running taramp 3k smart and it thumps two sa15d4 rev3 like its nothing. Taramp did make a smart 3k bass amp which would be better because its designed for bass so you get bass Frequency as the reg taramp smart 3 is fullrange. For a small amp it pushes with ease and dose not get hot. Im running 4ohm final
  3. Hi, every time i try to use subbox pro or winisd it goes crazy . im trying to get blprints/ measurements for and enclosure .plz any help is welcome. If possible center port 2 skar vxf 12s d4 tuned at 32. Id like 2cbft^3 per sub after displacement. My max dimensions in trunk are 13h,36w,24d. That would fit in nicely. Im running 3k smart taramp. Im going to wire final 1ohm to amp. The displacement for one VXF-12 is 0.233. Recommended Ported Volume: 1.80 ~ 2.00 ft³ Recommended Port Area: 29.75 in² Recommended Tuning Frequency: 32 Hz Enclosure recommendations above do not include subwoofer, bracing, and port displacement SUBWOOFER MEASUREMENTS Cut-out Diameter 11.13" Mounting Depth 8.50" Total Height 9.33" Outside Diameter 12.49" Magnet Diameter 8.63" 12-inch Dual 4 Ohm Voice Coil Configuration Peak Power: 3,000 Watts RMS Power: 1,500 Watts Competition Grade Pressed Paper Cone Stitched High Roll Foam Surround Advanced Air Flow Cooling System 3" High Temperature Copper Voice Coil Motor Weight: 300 oz Frequency Response: 22 - 250 Hz Sensitivity: 83.6 dB Fs: 34.4 Hz Re: Dual 4 Ω Qms: 4.46 Qes: 0.47 Qts: 0.43 Mms: 319.9 gr Nref: 0.19% Cms: 0.07 mm/N Bl: 33.8 n/a Vas: 22.7 L Sd: 471.4 cm² Xmax: 25 mm If you need to go wider you can go up to 40 and deep you can go 28 if needed. Thank you
  4. Hi i could use someones help getting a measurements/guid like blueprints. Ive wrote joe x but i imagine he has thousands of ppl asking him for help. Ive tried using subbox pro and winisd but im doing something wrong as the graph does craziness. Please if someone has the time to run these specs for me it would be greatly appreciated. If possible center port 2 skar vxf 12s d4 tuned at 32. Each sub have 2cbft^3 after displacement. My max dimensions in trunk are 13h,36w,24d. That would fit in nicely. Im running 3k smart taramp. Im going to wire final 1ohm to amp. The displacement for one VXF-12 is 0.233. Recommended Ported Volume: 1.80 ~ 2.00 ft³ Recommended Port Area: 29.75 in² Recommended Tuning Frequency: 32 Hz Enclosure recommendations above do not include subwoofer, bracing, and port displacement SUBWOOFER MEASUREMENTS Cut-out Diameter 11.13" Mounting Depth 8.50" Total Height 9.33" Outside Diameter 12.49" Magnet Diameter 8.63" 12-inch Dual 4 Ohm Voice Coil Configuration Peak Power: 3,000 Watts RMS Power: 1,500 Watts Competition Grade Pressed Paper Cone Stitched High Roll Foam Surround Advanced Air Flow Cooling System 3" High Temperature Copper Voice Coil Motor Weight: 300 oz Frequency Response: 22 - 250 Hz Sensitivity: 83.6 dB Fs: 34.4 Hz Re: Dual 4 Ω Qms: 4.46 Qes: 0.47 Qts: 0.43 Mms: 319.9 gr Nref: 0.19% Cms: 0.07 mm/N Bl: 33.8 n/a Vas: 22.7 L Sd: 471.4 cm² Xmax: 25 mm If you need to go wider you can go up to 40 and deep you can go 28 if needed. Thank you
×
×
  • Create New...