chow8400

Heading to the workshop on Saturday. I'll provide an update then. Thanks @Joe X

@Joe X 6.004 cu.ft³ Gross Volume 5.019 cu.ft³ Net Volume 56in² Port Area Port tuning 37hz (Fixed) 2 Holes (Ski Hole and Factory 8" Woofer Mount Area)

@Joe X 1. Burps or Sweeps 2. Multimeter and SPL Meter (Oscilloscope on order) 3. Enclosure Specifications: 6.004 cu.ft³ Gross Volume 5.019 cu.ft³ Net Volume 56in² Port Area Port tuning 37hz (Fixed) 4. Open (2 holes) - Ski Port, Factory Woofer Mounting Area (on rear deck).

Hi All, I would like to identify possible deficiencies or receive some suggestions to change the setup in my car. Its important to note I compete in the stock class, so I am limited to 2500w on the bass amp, a single battery (15v max). I have a Lexus IS250 with Factory Amp Installed and an Android Player. Last SPL Score: 140.7db (2ohm) Equipment 2 DB-SA272 12 (2ohms dvc) 1 Rockford Fosgate T2500-1BDCP 1 JL Audio TwK-88 1 XS Power PWR-S5-3400 1 Mechman 257A Alternator Big 3 upgrade 2/0 AWG Positive (12ft) and Ground (3ft) 8 AWG Speaker Wire (4ft in length) Knukonceptz Twisted RCAs I've wired the subwoofers down to 2 ohms and using speaker A (+/‐) on the Rockford to terminate the connection. I am using second skind damplifier pro mats in a single layer. An image is attached showing the rear for the trunk/sub. The top view of the enclosure is also seen, with the port. Lexus has a ski port, which the extend port of the enclosure goes through. This is due to the fact that my rear seats cannot go down.