marxx

@TheBKGyes man and as i said i even grounded the amp to the battery and still the same problem

@TheBKGwhen i put my amp in his car it does pull amps normally

@TheBKGi did use different ground points even to the battery and nothin lol man

i tested this with the test tone man and RCA puts out 3.7volt and my RCA cables are brand new from knuconceptz headunit is also new all is new

@TheBKGill put the leads on the RCA cable not on the amplifiers RCA yes.?

@TheBKGvoltage is 14.4 but i didnt get wat u mean to unplug one of the amps RCA and check with the multimeter where will i put my probes of my multimer.? RCA thers only left and right not positive and negative and my headunits RCA puts out 3.7 volt

yes in his sounds louder and the speakers sound more filled

@TheBKG Pioneer AVH Z-2200 all 6 speakers Alpine Type R 5 channel amplifier Alpine type X Sub Focal 12inch 4ohm Speaker wire size 14Gauge SUB 12gauge All speaker wires are new and connect straigth to the amplifier same as power and ground wire which is OFC 2gauge

@Kyblack76its Suzuki swift sport 2006 Japan loads are same man i checked and wat do u mean of my SOURCE.?

@Dafaselesthats wat im begin to thinking that the car is programed somehow and wont let the amp pull amps idont know man this sucks

@Kyblack76we both have 6 speakers and sub sub channel at 4ohm speaker channel 1-2 at 2ohm and 3-4 at 4ohm for both of us and like i said man even when i play a test tone to see the full current of my amp which is rated at 90A cuz it has 3x30A fuses it only reads 20A out of 90A in my buddys car when i put it it hits around 60-70 u can tell somethings wrong even from the test tone..

even when we play a test tone mine only pulss 20amp out of 90.. but in my buddys it hits almost all 90.. u can tell thers something wrong

load is same as mine and 6 speakers 1 sub all wired same as mine dont u think 5 amps current draw for a 5 channel is realy low.?

I have a weird problem when i mesaure with a clamp meter how many amps my 5 channel is pulling at full blast throught the power wire it only reads 5 amps.. when we mesaure my buddys 5 channel it pulls around 40 and when we put my 5 channel in his car it does pull normaly around 35-40 any idea why my amp wont pull amps like it supposes 2.?