OuijaEight

Hopefully @joe x can tell me if this works..

Wolffram said 1.5 per woofer @ 12 to 14 ft3 would a 3” port opening on a box 3.02 net be too small??

Any help?

Thanks in advance!!

I’m trying to design a box for these wolffram 12” dual 2 ohm woofers.. running 2 ohm load, they are 750 rms each.. I believe they have a 2.5 coil I can’t find the t/s specs on them.. I used an app and am wondering if @Joe X can help me again.. want the box 32 to 35 hz if possible … if the box below needs too be redesigned going in a 300 max space is 16h 38w 40d here is what I came up with if this would be fine and not cause any issues.. please lmk

Thanks appreciate you.

Ok, thanks so much. How much power do you recommend putting to them?

I found this… hoping @Joe X can help me… looks like I’m the book they recommend 40hz tuning lower probably isn’t a thing xtrpro102.pdf

Features: Diameter: 12" Max Power Handling: 5000 Watts Nominal Power Handling: 2500 Watts RMS Power Handling: 1250 Watts Fs (Hz): 32.3/30.5 Qts: 0.59/0.56 (.67L) Vas (cu ft): 1.256/1.198 (.36 cu m) Sensitivity: 84.4dB/83.7dB Mounting Hole Dia.: 11" Mounting Depth: 6.5" Polypropylene dust cap and paper cone is moisture and UV resistant Symmetrical tuned long-throw surround Dual interlaced conex spider Custom cast aluminum frame Tinsel leads stitched and looped across spider Venting in voice coil former is part of the enhanced voice coil cooling system Advanced forced convection cooling system Tri-cooling system Copper wound voice coil on aluminum former

I need help with a sub box. For 2 Orion XTR PROs Dual 4 Ohm woofers. I can’t find much oh them when it comes too t/s parameters.. box will be going in a chrysler 300 max box space area is around 40 w 43 d x 20 high max gonna run them at 1500 to 2000 watts so a box that can run lows say 32 to 33 hz plz help subs back port back..