Jump to content

PeckawoodJones

Members
  • Posts

    2
  • Joined

  • Last visited

About PeckawoodJones

PeckawoodJones's Achievements

Newbie

Newbie (1/14)

  • One Month Later Rare
  • Week One Done Rare
  • First Post Rare
  • Conversation Starter Rare

Recent Badges

0

Reputation

  1. Understood Joe and thank you for the response it's much appreciated. Box tuning is 33hz, I've used the DD-1 to tune the amp however I know this obviously doesn't cover everything as you mentioned. Additionally, in one of the videos of Steve I watched recently he was going over the importance of why you need a quality LOC, which I'm using an AudioControl LC2iPro, which I tapped some speaker outputs as my inputs into the LOC. Steve mentioned that I believe (I could have manterrupted) that most amps "like" 5volts in from a LOC. I used a multi-meter to adjust gain on the LOC and was able to get 5volts finally right on the mark. Did I understand this correctly? Thanks again for any help in advance.
  2. Just to clarify... The general "Rule of Thumb" is to set the amps Subsonic Filter to 1/2 Octave below Recommended BOX Tuning HZ? So for example, I have 2x Skar 12" ZVX12V2's in a Skar AR2X12V Dual 12" ported enclosure on a Skar SKv2-3500.1D amp. The Box's tuning frequency per their website is 33hz. So I would tune the subsonic filter to around 33hz - 1/2 Octave, being 24.75hz, correct?
×
×
  • Create New...