Bigg Boy

if I am wrong btl sit a good bit lower then 1 cold. like .65

I was going to "float it" off the back of my box which the back is 1.5" thick... but I'll see if i can find some where else

my alt harness had the gnd connect I guess through the harness. I will give it a shot tho

bump anyone

I have some us amps md2d for sale.

u talking about the three terminals on top I have a gnd to and done have it grounded. Im gonna go try it. Maybe that why my alt doesnt do anything at idle

be very carful runing that amp at 1 ohm. we had one catch fire at 1 ohm.

You have to ground regulators? I have no ground wire or lug on mine, this could be why mine is doing the same thing?

2kw at 1 ohm??? I have seen a couple bench test like this. "Battery only 3435w @ 4,60 Ohm (start volt 12,8v drop to 12,1v) 5631w @ 2,30 Ohm (start volt 12,8v drop to 11,8v) 8976w @ 1,15 Ohm (start volt 12,8v drop to 11,4v) Battery + power supply 3805w @ 4,60 Ohm (start volt 14v drop to 12,9v) 6250w @ 2,30 Ohm (start volt 14v drop to 12,4v) 9550w @ 1,15 Ohm (start volt 14v drop to 11,9v) So it's not to bad for one amp on a 12v system "

Do you think my electrical will be able to hold one okay? (see sig)

Any one have experience with this amp? I am looking into getting one. But the fact it doesn't come with a warranty is making me think twice.

I think I just got pwned, haha... ill figure out a way to do somethin

would be a pain due to the interchange ports, mabe i can figure something out

dont think im gonna need bracing, 1.5" thick all around, 2.25" baffle

thats good, my box will take 3 sheets

I can get them for about the same price. What you you guys use? Any reason no to use birch?

bump bump

have no needs for them, thanks for the offer tho.

sure will.... bump

Bump..... Need these gone, make me an offer

$305?

know that amp, amp is shot

Pics with date and name added to first post

I get out of class at 5pm I'll get pics as soon as I get out

I have 5 Us amps Md2d, they have hardly been used, some have minor scraches on them nothing major just from being taking in and out of the car. I love the amps, they even come with a clear plexi glass back so you can mount them to see the inter workings. I am asking $305 Here is some specs: US Amps MD-2D - US Amps 1 Ch MD Series Amplifier [MD-2D] - $697.49 : CarJamz.com, Inc., Car Audio, Stereo, HID Conversion, Custom Boxes, Chrome Trim, Rims, Kinetik 550W x 1 @ 4O mono 1000W x 1 @ 2O mono 1500W x 1 @ 1O mono (under rated) Total Harmonic Distortion: 0.03 Frequency Response: 20~250 Power Band Width (Frequency Response): 20~500 Hz Crossover Frequency: 40~250 Hz - 15~40 dB 40~1K Hz Damping Factor: 100 Dimensions [(W) 2.5/63.5(H) x 8.75/222(D) in/mm]: 12.6/320 Fuse Rating: 30A x 3 Power Voltage Range: 12~16V High efficiency Class D design(1D/2D/3D) Output stages utilize high-current MOSFET devices High speed, audio-grade components in all low-level stages Active Constant Current Bias Tracking Circuit Platinum-plated RCA inputs and connectors Wide range of sensitivity accepts signal from any head unit 24dB/octave Subsonic Crossover 24dB/octave Lowpass Crossover True Line Output Auto Bridge feature Short Circuit Protection have all the boxes for them