Sundown Warrior

Here are a few shots of the wiring 95% cleaned up. I know its not super neat but it gets the job done for now.

The Epicenter is a specialized parametric EQ that takes lower frequencies that have been rolled off in music production and boosts them. Not really good for most rap but if your listening to metal it comes in handy. The DQXS is a super versatile EQ with over 100 graphic equalization bands and 6 parametric equalization bands. The Matrixes are 13 volt line drivers. It's cool I am one to think no questions are "noob" questions.

Annnd this is my processing and distribution deck all finished up... mostly. The wiring is a little hectic right now b/c I thought i was going to the Big OKie today, but alas it was not to be. I will clean up a few things and get it ready for some comps. This is the deck just before intsall. The driver and passneger side views. And seats down.

For SPL you are absolutely correct. But for music and my particular setup it was the best choice. I had a 18x8 port on the first box and it did not perform the way i wanted it to. So I switch to a different style and it came out well for music.

Thanks!!!

10 cubes.

They are 6 x 13 tubes. I wanted it to musically correct and it is. I like SPL but SQ is what I strive for. It is tuned to 28hz. Thanks for the props.

This is the underseat deck which will be done tomorrow and the build will be complete. It will be the platform for the processing and power distribution for the 100.4s. I am trying to get the money together to send the Epicenter and Matrixes back to Audiocontrol for screen printing but i will post more pics of the totally finished build tomorrow.

This is the latest (and hopefully last) redux of my F-150. The equipment going in this time from front to back are a Pioneer AVH-P4000 DVD, Audiocontrol Epicenter, DQXS and Matrixes (x2), 10 Oxygen Audio Component Speakers (Air 83 set with a 6.5 midrange replacing the 8" woofer in the front doors and just a tweet and the 6.5 midrange for the rear), 2 Sundown Audio 100.4s driving the Mids and Highs, 2 Sundown Audio Nightshade 18s and 2 Sundown Audio 3000Ds breathing life into the subs. 1 Iraggi 300 amp alternator, Powermaster batts (1 2700 and 2 3100s) all Knukonceptz wiring. I will apologize for the lack of pictures my camera was lost and it contained about 2/3 of my build log, but enough of the B.S. Front door test fit Front door 95% done. DONE!!! Lets move on to the rear doors. This took me all of 10 min. from start to finish. Next is the enclosure from concept to finish. I used a Kreg Jig on this one and it came out nicely. It is very solid. I used 3/4" birch for the baffle and 1/2" FRP for the rest of the enclosure. FRP is friggin awesome in my opinion. It has better uniform quality than just fiberglassing over birch on ones' own and costs about the same and in my case it was free:) All I had to do was sand it a little to rough it up and then use one coat of resin and cloth. After that I let it cure for about 2 days and then coated it with Herculiner so that it matched the bed of my truck and then let that cure for a day. In between the fiberglass and Herculiner I used 5/8" all-thread and create-a-bolt kits for bracing. The enclosure is bolted to the frame in four places. Two utilizing the all-thread create-a-bolt tactic and the other 2 with the bed bolts. This is a little side project I'm trying to perfect. I molded some 9" dust caps b/c I thought that the 5" ones that come standard on the Nightshades, although nice in their own right, were a little puny. I have not gotten the process perfect yet but it will happen it will just take some patience on my part.