JPagan
-
Posts
1430 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by JPagan
-
-
-
money sent sold
SOLD
-
I am selling a used Audiopipe mini 1500. This amp was ran for 5 months @1ohm with no issues, It's a great amp for the money IMO. I am asking 100 shipped OBO.
-
I have a Fi SSD motor from the current model of the ssd. It has the cooling option and is in great condition. I am asking 50+ shipping OBO.
-
I love the new board layout , and the new heat sink looks good too. Not really important, but will there be any changes to the boxes the amps come in ?
-
can someone explain to me how setting gains with a DD-1 not under any load is accurate for distortion and clipping?
i set my gains with a dd-1 at vol 25 at 14.4 volts no distortion no clipping.. sweet im done i hit play crank it full tilt and drop to 12.4 volts that just dropped my clip and distortion ceiling way down so now at vol 25 i am in fact distorting and cliping
im just curious on how that works?
With my old setup I would drop to the 12s at full tilt, so I would just use the dd1 to set my gains with the car off, so all of my electronics were seeing my resting voltage of 12.8.
-
can't wait to see some test results from these
-
the leads are like that my ssd too. I guess they just decided to change it up. If you notice they now use smaller spiders mounted lower on the basket so no lead slap, and there are spacers between the basket and motor to account for that. I know i run my ssd very hard and have had no problems with the leads, so i wouldnt worry about it.
-
I'm gonna have a pair. So 6 cubes total. If I end up reconing again I'm getting level 5 coil upgrades. But for now I want to make them last. I've got plenty of room for an enclosure
Forgot to mention these are 15s***
I assumed 12s for some reason, even with lvl 5 coils it's still gonna be a bit much on power for those subs with that amp @ .5
Yeah id say that is too much power, I'd go with a saz 1500.
-
they are psi platform 3 18s.
-
Feel bad for bumping an old thread but I tuned my highs and mids with track 8 or -15db 1000hz. Should it be okay or Should I tune it back to -10db?
id use -5db @1000hz for your mids and highs.
-
Nice score for sure and me thinks he needs the new version xls.
I don't think those would handle the power either, he needs something with a 4" coil
-
random question, but do you still work your regular job while doing all this? sounds like a ton of work lol
-
Looks like the beginning of a low end monster
-
lol, steel should stop that flex dead in its tracks.
-
I would wire the amps to a higher impedance or just keep the gain fairly low until you get more batteries and a H/o alt or 2. Even if you tuned your system right now with a dd1 to be clip free, you would still have bad voltage drop causing the amps the clip sooner than they should.
-
mayhems will handle 2500 with ease.
agreed, Audiofanaticz (a moderator on here) ran a SAZ 4500 per mayhem and they handled it, so you will have no issues running a mayhem on it's rated power.
-
Show the boxxxxxxxxxxxxxxxxxxxxxxxxxxxx
lol, I always forget to do that in my vids... here's a pic of it when I first got it:
-
Here's my new SSD 12 bridged on the rear channels of my sax 50.4, so around 160w and its getting down pretty good. It's in a 2.25 cubic foot box tuned to 33hz built by Dave the box guy. -
I watched that episode earlier, nice to see shops doing things right.
-
I would go with the sax 1200,much higher quality amp, smaller, and built to put out most of it's power when wired to 1ohm like most daily drivers. I believe Jacob has clamped around 1200@2ohm from the sax 1200.
-
thats a birch ply.
Dave uses Arauco plywood.
-
I'm thinking some xs power d1400s will be going in.
-
Our talk today was great, cant wait to see you get busy on this one.
And .....
...
....
Voltage!!!
WUT!!!!!
hmm 14v batts?
.gif){kind=small}
Box check please!~ z v3 15
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
displacement on that sub is actually .24, .14 was just a typo on the site.