[Rockford Fosgate T400.4 FS/FT]

Well i didnt know the specs on output have changed im sorry, well upppp

[Rockford Fosgate T400.4 FS/FT]

UPPP

[Rockford Fosgate T400.4 FS/FT]

Im sry ill look on the RF site for the older specs..

[Rockford Fosgate T400.4 FS/FT]

Specs up, TO THE TOP!!

[Rockford Fosgate T400.4 FS/FT]

Just lmk quicksilver.. and uppp!!

[Rockford Fosgate T400.4 FS/FT]

I really want to try to get a trade for a Amp for my woofers but if all falls through - $230 plus shipping - Not written in stone just obo more or less around that..

how much you asking for the rf amp

[Rockford Fosgate T400.4 FS/FT]

Ok so I have a Rockford Fosgate T400.4 Multi Channel for sale or trade, It is very lighty used, was just running some RF P162's..LOOKING for a amp to run my Dc lvl 4xl or Diamond D9's, so looking for a SAZ 2000, 2500, or etc.. Will COMBO below for a amp if needed..

Its just a little dusty glare, its not scratched fyi.. thanks

Number of Channels 4

Rated Power

(RMS Continuous Power) 60 Watts x 4 @ 4-Ohms

100 Watts x 4 @ 2-Ohms

200 Watts x 2 @ 4-Ohms Bridged

2-Ohms x 2 Bridged Stable

Total Power

(Sum of Rated Power) 400 Watts

Dynamic Power

(PVC/PowerCube® Measurement) Front Channels

90 Watts x 2 @ 4-Ohms 0° Res

154 Watts x 2 @ 2-Ohms 0° Res

Rear Channels

90 Watts x 2 @ 4-Ohms 0° Res

154 Watts x 2 @ 2-Ohms 0° Res

Bridgeable Yes

Efficiency (average) 69% @ 4-Ohm

68% @ 2-Ohm

Crossover Controls Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth

Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth

Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth

Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth

Tone Controls Front Channels - Punch EQ

Treble: 0dB to +12dB @ 12kHz

Bass: 0dB to +18dB @ 45Hz

Rear Channels - Punch EQ

Treble: 0dB to +12dB @ 12kHz

Bass: 0dB to +18dB @ 45Hz

Signal Input Front Low level: 1 RCA pair

Rear Low level: 1 RCA pair

Also Have a Diamond 600.1 Mono,

• Class D amplifier topology

• Stable into 1 Ohm mono load

• Strap two D600.1 for over 1200watts @ 2 ohms

• 24dB/Octave low pass filter (50-250Hz)

• Pass-Thru line output for daisy chaining amplifiers

• Remote level control included with amplifier

• Pulse Width Modulated MOSFET switching power supply

• Extruded aluminum heatsink

• Nickel plated RCA low level audio inputs

• Nickel plated power and speaker connector blocks

• Power on and protection LED lighting for easy diagnostics

• Thermal, short circuit, and low impedance protection

• 0 - 12dB bass boost

• Chassis mounted ATC/ATO type automotive fuses

• Proudly designed and engineered in the USA

RMS @ 4 Ohm 275 Watts x 1

RMS @ 2 Ohm 450 Watts x 1

RMS @ 1 Ohm 600 Watts x 1

Crossover LP

THD <0.02%

Frequency Response

20 - 20,000 Hz

A Jensen VM9312HD id like to sell or trade along for a Amp..Has HD Module and receiver

Please LMK Thanks!!

[660GTi 6.5 Components]

There is only one set of speakers? so only 2 speakers?

[The Tahoe Got Painted! Black with Red Pearl and Black! HOT!! (imo) (TAILIGHTS TINTED pg7) FINISHED PICS PG 12 and 15]

Looks Sick

[My trucks flex :)]

what was the second song u were playing? pm me it if u can thanks!

[Min. upgrades for say 2500RMS]

Yea you cant put a big strain on ur stock alt otherwise you will be full fielding and destroy ur alt and batterys, so

[What member of SMD is the best at box designs? Please Give you opinion!!]

I just need goood layout, i would give the guy exact measurement of the total space i have and what id be running and etc..

[What member of SMD is the best at box designs? Please Give you opinion!!]

I want a Wall Design, in PDF or photoshop file format, maybe google sketch up, will pay for it if its professional quality not just some lines drawn out.. so i know some guys on here do this and do it very dam good so WHO ARE YOU..

[Lightning Audio]

nice..

[What member of SMD is the best at box designs? Please Give you opinion!!]

Someone has to know who does them....

[What member of SMD is the best at box designs? Please Give you opinion!!]

Like it says im building a wall, but i never have built a "wall" and would like a layout or a full design, idk the guy who does them, but if someone can let me know that would be awesome.. thanks

[Official SojiaRaggs9000 Feedback]

Traded MY ipod Nano for his RF P165s, smooth transaction, would deal with again, thanks alot!

[Only a man would try this.]

LMAO, that would suck..

[Alpine, Diamond RocksfordFosgate, NEC TOUCHSCREEN MONITER, Xbox 360, Rc Cars, LED LIGHT STRIPS, ALOT!!!]

UPPP.

WANT TO MOVE THE

DIAMOND AMPS LMK THANKS

[Ebay deal]

Im the sure the person had a second acount that was bidding on it to raise the price or something..

[FiberGlass, Resin, Fleese? Dry Fiber? Help PLEASE]

Thats what im guessing it is, iv seen it used in a build, prolly alot easier to work with then dry cloth since its all combined already, and u just spread it... does anyone know if this is what it is? and the mixture to use?

[FiberGlass, Resin, Fleese? Dry Fiber? Help PLEASE]

Iv Seen Fiberglass cloth, that is a solid sheet of fiber, that u cut and put of the resin, then put more resin over that,

Iv also seen, where the fiberglass is not a sheet, its like a wet mixture in a bucket that u make, then spread over with a paint brush,... idk, maybe its the resin and fiberglass mixed together??

[FiberGlass, Resin, Fleese? Dry Fiber? Help PLEASE]

So then just using Resin is like a shell, then ud sand it, spread fiber cloth all over, then more resin, then its like a tank?

also see fiber cloth, and i see where the fiberglass is all wet mixed in a bucket, that u spread with a brush?? whats that called??

[FiberGlass, Resin, Fleese? Dry Fiber? Help PLEASE]

ok so iv been reading about fiber glass for a while now, and im still a little confuzed on the types they are, now i see,

you make a box, mount, woffer mount, then u wrap it tightly in fleece, then put resin and primer over it, then thats is, sand and paint,now this isnt fiberglass, what is this called?

then when u do that exact same thing, but u use like spandex, then resin, then wet fiberglass and spread it all over, whats the difference? fiberglass just alot stronger ? can hold more??

one looks better then the other???

alsoo, for mixing resin, do they sell premixed? or do u have to mix it with a hardner and ex...

please help me with this, iv read and searches, but have not found direct answer to some of my questions, thanks alot!!! thanks for your time..

[What do you say to people who.....]

A men, lol I AGREE