SubSonic

Well i didnt know the specs on output have changed im sorry, well upppp

UPPP

Im sry ill look on the RF site for the older specs..

Specs up, TO THE TOP!!

Just lmk quicksilver.. and uppp!!

I really want to try to get a trade for a Amp for my woofers but if all falls through - $230 plus shipping - Not written in stone just obo more or less around that..

Ok so I have a Rockford Fosgate T400.4 Multi Channel for sale or trade, It is very lighty used, was just running some RF P162's..LOOKING for a amp to run my Dc lvl 4xl or Diamond D9's, so looking for a SAZ 2000, 2500, or etc.. Will COMBO below for a amp if needed.. Its just a little dusty glare, its not scratched fyi.. thanks Number of Channels 4 Rated Power (RMS Continuous Power) 60 Watts x 4 @ 4-Ohms 100 Watts x 4 @ 2-Ohms 200 Watts x 2 @ 4-Ohms Bridged 2-Ohms x 2 Bridged Stable Total Power (Sum of Rated Power) 400 Watts Dynamic Power (PVC/PowerCube® Measurement) Front Channels 90 Watts x 2 @ 4-Ohms 0° Res 154 Watts x 2 @ 2-Ohms 0° Res Rear Channels 90 Watts x 2 @ 4-Ohms 0° Res 154 Watts x 2 @ 2-Ohms 0° Res Bridgeable Yes Efficiency (average) 69% @ 4-Ohm 68% @ 2-Ohm Crossover Controls Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone Controls Front Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Rear Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Signal Input Front Low level: 1 RCA pair Rear Low level: 1 RCA pair Also Have a Diamond 600.1 Mono, • Class D amplifier topology • Stable into 1 Ohm mono load • Strap two D600.1 for over 1200watts @ 2 ohms • 24dB/Octave low pass filter (50-250Hz) • Pass-Thru line output for daisy chaining amplifiers • Remote level control included with amplifier • Pulse Width Modulated MOSFET switching power supply • Extruded aluminum heatsink • Nickel plated RCA low level audio inputs • Nickel plated power and speaker connector blocks • Power on and protection LED lighting for easy diagnostics • Thermal, short circuit, and low impedance protection • 0 - 12dB bass boost • Chassis mounted ATC/ATO type automotive fuses • Proudly designed and engineered in the USA RMS @ 4 Ohm 275 Watts x 1 RMS @ 2 Ohm 450 Watts x 1 RMS @ 1 Ohm 600 Watts x 1 Crossover LP THD <0.02% Frequency Response 20 - 20,000 Hz A Jensen VM9312HD id like to sell or trade along for a Amp..Has HD Module and receiver Please LMK Thanks!!

There is only one set of speakers? so only 2 speakers?

Looks Sick

what was the second song u were playing? pm me it if u can thanks!

Yea you cant put a big strain on ur stock alt otherwise you will be full fielding and destroy ur alt and batterys, so

I just need goood layout, i would give the guy exact measurement of the total space i have and what id be running and etc..

I want a Wall Design, in PDF or photoshop file format, maybe google sketch up, will pay for it if its professional quality not just some lines drawn out.. so i know some guys on here do this and do it very dam good so WHO ARE YOU..

nice..

Someone has to know who does them....

Like it says im building a wall, but i never have built a "wall" and would like a layout or a full design, idk the guy who does them, but if someone can let me know that would be awesome.. thanks

Traded MY ipod Nano for his RF P165s, smooth transaction, would deal with again, thanks alot!

LMAO, that would suck..

UPPP. WANT TO MOVE THE DIAMOND AMPS LMK THANKS

Im the sure the person had a second acount that was bidding on it to raise the price or something..

Thats what im guessing it is, iv seen it used in a build, prolly alot easier to work with then dry cloth since its all combined already, and u just spread it... does anyone know if this is what it is? and the mixture to use?

Iv Seen Fiberglass cloth, that is a solid sheet of fiber, that u cut and put of the resin, then put more resin over that, Iv also seen, where the fiberglass is not a sheet, its like a wet mixture in a bucket that u make, then spread over with a paint brush,... idk, maybe its the resin and fiberglass mixed together??

So then just using Resin is like a shell, then ud sand it, spread fiber cloth all over, then more resin, then its like a tank? also see fiber cloth, and i see where the fiberglass is all wet mixed in a bucket, that u spread with a brush?? whats that called??

ok so iv been reading about fiber glass for a while now, and im still a little confuzed on the types they are, now i see, you make a box, mount, woffer mount, then u wrap it tightly in fleece, then put resin and primer over it, then thats is, sand and paint,now this isnt fiberglass, what is this called? then when u do that exact same thing, but u use like spandex, then resin, then wet fiberglass and spread it all over, whats the difference? fiberglass just alot stronger ? can hold more?? one looks better then the other??? alsoo, for mixing resin, do they sell premixed? or do u have to mix it with a hardner and ex... please help me with this, iv read and searches, but have not found direct answer to some of my questions, thanks alot!!! thanks for your time..