Jump to content

codycr6

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by codycr6

  1. My rear deck had four square holes in it, then the 5x7 cutout in the center. The holes are about 8x8 or so, by the time I added the 3/4 inch mdf and top mounted the subs, there was just enough room to clear the basket. I will try to take pictures of the trunk sometime, but basically you don't even see them unless you get down level with it and look for them. I used a pair of twelves mounted IB behind the rear seat before this, and really prefer this. I still need to take the twelves out and build a new panel without cutouts behind the rear seat.
  2. Built a new rear deck out of 3/4 mdf for four 10's, single 5x7 in the middle run mono for rear fill, 6.5's in the kicks and another 5x7 for center channel, all mids and highs are Infinity, amps are PPI, Alpine head unit. I have a grill that covers it all, but seldom keep it on. Not a daily driver, so it is usually locked up in my shop if I am not at a show or cruise in.
×
×
  • Create New...