Crump

so what would the wiring diagram look like? wires from both coils and put into one channel?

yeah i was going to get two ssds @ 1 ohm so i would have a 1 ohm amp load, but i ended up getting one ssd for christmas and decided i wanted more power for my RF t-1000-1 so i got a dual 2 BL

so one voice coil per channel so would that mean 550 watts per coil?

It says 1100 w x1 channel RMS @ 4 ohms 550 w x 2 channel @ 2 ohms 225 w x 2 channel @ 4 ohms I have a 12" SSD with dual 1 ohm can i wire it to this amp, cuz the 12volt says .5 ohms or 2 ohms, can this amp be bridged at 2 ohms? Here is the amp http://www.maxxsonics.com/crunch/PZ_amps_details.html its the P1100.2 Please Help i told my friend that i would give them to him, but i dunno if theyll work

wow that is hilarious

man i did that with my very first amp, and in the 1st week it didn't work anymore and i had to send it in. That was in October, and still havent got it back, From now on ill always buy from my local shop, or the brands website.

nice cuz i just ordered the right amount from darvex then, nice. 12" BL ordered too.

I have the RF t-1000-1 It has a built in 100 amp fuse, so does that mean that i dont have to fuse it to the rear battery?

thanks thats what i thought, but one of my friends got me ?ing myself. thanks

well if it is that dumb of a ? then you could easily answer it instead of being a dick?

Battery in Front, Battery in Back, 1 Amp Is it 18" from front batt to trunk bat, then rear batt to amp? Or 18" from front batt to trunk batt, And on the same wire 18" from rear batt, and then 1 from rear batt to amp? So 2 or 3 fuses?

Would that 12" box work for a 12" ssd?

Just looking for one doesnt have to be fully loaded or w/e. Just the sub would be fine.

Looking at all that you show me, but include pics please.

what do you guys use to draw the perfect circles? for like 12" subs? a tool link would be nice, thanks

Nah man i am not interested in buying any panels, this is going to be my first Official build, i mean i have installed a couple of my friends systems and i am in the running for an installer job at the local shop, but i wanna try to do all my stuff by myself, thanks though. Here is my Plan, 1 RF T-1500bd 1 RF t-400-4 2 12" Fi SSD's 1 5.25" RF component system 1 T1 Tweeter System 1 Pioneer H/U not sure what model yet And i am going to try to fiberglass the inside of the box, and on some panels for the speakers BUT its cold here in Illinois right now, so i dont know when i will be able to start

well i am going to push around 1700 watts to two Fi SSD's? so what should i need to do, Resin then cloth then more resin, or just resin

For the inside of a box, is it 1. Resin, Let it Harden 2. Resin again with fiberglass cloth is that it or what else do i need to do?

well the baffle will be pressed (or sealed) aginast 1st and will add 3/4" around the vent too, that really doesnt matter?

If i add a second baffle to make the sub's rubber surround mount flush, will the baffle effect the tuning of the box? because it add's 3/4" ? of MDF

Good Deal i Just bought two SSD's thanks

cant find them any sites would help

do you have to ground the led if you use the fuses or are they grounded so you can plug both wires in?

cool thanks man

does every car have a switched power source in the fuse box and if so what does it look like? I meant that i have this fuse powered thing that plugs into the fuse and turns it into a 18 guage wire so you can run the power.