[Pac Rca Filter Killing Sub Power!?]

Get rid of the filters first. And second I believe you have your amps mixed up possibly??? Maybe a bad installer... Sub amps have one pair of RCA inputs while 4 Channel amps have 2 pairs of RCA inputs.

EDIT: IF the installer did mess up that bad they deserve to be fired.

[I Have A Good Question..]

nah, fish compressed into sticks doesn't cut it for me

[Tahoe Finally Got New Leather! (done, Pics Video!) Edit: Smd Sig Embroidered Headrests!]

Diggin the new bucket seat (literally), new leather will look great though!

[Midnight Tonight]

Conflicker is what you're lookin for. Microsoft's offering up 250,000 for anyone that can find the programmers of it, and so far what's been said about it is "The worm is set to activate on April 1st, 2009, to look for updates whose objectives are currently unknown." So no one really knows what it will do, either steal a lot of identities/wipe computers or be an April Fools Joke?

[Woopty F#cking Doo.......thanks For The 10 Or 15 Bucks Lol]

Lookin forward to my "stimulus"

[How To Demo Like Steve ?]

Really? I've never had any problems with boost knobs, I just set the amp with the boost knobs up all the way, then turn the knob off and when I want more bass I turn the knob to where it sounds best.

[Need A Few Ideas]

thanks guys

Is a high level input the same thing as a line output?

I am trying to make my factory radio have rca jacks for my amp. What do I need?

No don't worry bout "high level inputs" some amps have them some don't just get a line output converter from any place and splice it into your rear left speaker line then run the RCA's from it to your amp, don't forget to run the remote turn-on lead.

[Mr. Shamwow Arrested]

Dang I was just about to post this, HILARIOUS though.

[Avic Install]

i also did that mute wire trick.. didn't work.. bump for a kick ass deck though

Thanks man! I'm very happy with it so far.

[Avic Install]

I bet the new mute location is probably loose in the harness then I'll see what I can do to fix it.

[Avic Install]

Yeah i did move the mute to that spot and ground it with parking brake, so I guess I may just software it to 128.

[Avic Install]

I know this isn't huge or anything but just thought i'd show what I got accomplished today.

HD Radio Tuner & Double Din Bracket (built to order...now being mass produced)

What it looked like before:

All the old out

And here's the new

Um mess of wires...

Everything Done!

Overall I had a fun time with this but didn't expect to have to hide-away so much stuff like the mic, GPS antenna, and the HD radio box but got it all done. I also set up the hardware bypass on this one but it still won't play videos once I get over 16, and I also didn't install the speed sensor wire so it must know how fast I'm going through GPS and locking me out when I go over 16. Any tips?

[Dropping A Mono Leaf]

I think he means a Pontiac Grand Prix...

[Any Ideas On How To Fix It?]

Neo_frog got it right for ya now, you'll have to to a system restore off the installation CD

[Any Ideas On How To Fix It?]

and i'm there but there is no explorer.exe or anything. soo what???

Check c:\windows\system32\ and see if explorer.exe is there.

[Any Ideas On How To Fix It?]

reboot n keep hittin either f9-f10-f11-f12 repedaly and it will boot into system restore, but depends on the comp also? and what kinda windows?

haha it's F8 and that just gives ya the safe-mode option. regedit should do the trick for him if not he'll have to put in the installer disk and do some automated system recovery.

[Any Ideas On How To Fix It?]

Gottcha covered, I see stuff like this all the time. The registry entry HKLM/Software/Microsoft/Windows NT/Current Version/Image File Execution Options/explorer.exe has a key similar to "Debugger" with value similar to "C:\Windows\Infected.exe".

So go to run then "regedit"

Then go to that location HKLM/Software....

and delete the Debugger or similar key, reboot and should be good to go.

[Grrr....]

I took my car to a shop once because I ran out of 1/0 wire and was at the end of my patience, luckily I know the owner and they installed it then walked me through to show they used all the proper wire and did it right for me.

[What Battery?]

Interstate makes good batteries if you aren't drawing a lot of current, but if you can find a yellow top in that price range that's a fantastic battery.

[Dropping A Mono Leaf]

You could always cut the shackles in the rear...weld it up good though when you slice your bit out.

[Fully Loaded Fi Bl 18" Enclosure]

Building one. 5-10 cubic feet ported tuned to ~32hz

[Good Daily Driving Power Range?]

I run roughly 2k rms to a pair of 12s, then around 200 to mids highs but hopefully I'll change that soon....

[0/2 Guage Terminals And Fuse Blocks]

Rockford makes a 2/0 gauge fuse block. Link As far as the lugs go.... http://www.wiringproducts.com/

Didn't know about the 2/0 fuse block looks good though!

[0/2 Guage Terminals And Fuse Blocks]

Welding supply will have ring terminals, and just get some 1/0 fuse blocks and shave down a few strands.

[Help: How Do I Know A Good Wire Brand?]

I know you're tryin to be cautious with everything, and give you props for that, but if you're running 500-700 RMS the super expensive wire isn't gonna be necessary, when you get into 1/0 that's when wire's gonna be different. I remember you making a post about some Knukonceptz you got before and that stuff is good wire lots of people on the site also just go to welding supply stores to pick up their wire and swear it's the best wire ever.

Some of the stuff just has to do with brand-association and who you like to do business with the most.