hhaudio

Well I was holding off on the aftermarket headunit. I was going for a sleeper look. Guess I'll start looking for a headunit. I threw a Audiobahn 15" in and there wasnt any smell though? That's why I was confused. Any ideas on how to set the gain on the Hi-Lo converter for the time being? Thanks Again guys

just barely negative on bass. Its stock, i'm thinking maybe a gain setting on the hi-lo converter.

Its the Massive Audio Nano Block N2 (800w RMS). Gain I believe is below half now, I was turning it down as I was driving. Box is tuned to around 32hz. about 1.5 cubes per sub with a 2in pvc port for each. Thanks

So I threw my Hifonics 12's in a ported box, and I smell burnt/burning coil all the time now. Unless I turn it down to the point they aren't moving any air. Burned CDs, radio, bought CDs... no matter what I smell coil. They are still bumping and no change in resistance. Any ideas??? Thanks, Matt

haha dude thats awesome. a kid that I went to school with got in a wreck on his way to our senior prom.

I searched but I couldn't find anything specific most of it was other dealers. I saw them advertised on here and assumed they were a good company, but I guess I was wrong. I guess he'll do some more waiting. lol

Has anyone used dealercostcaraudio.com? One of the kids I went to high school with wanted some subs. I was gonna wire it up and he ordered the subs in about Oct. 2009 if I remember correctly. The subs were back-ordered, then he finnaly canceled the order but hasn't gotten his money back or the subs. If anyone has a connection and can help him out PM me for the order #. -Matt Mods: please move to appropriate section. I was unsure of where to post.

Well I got a new amp. I got a Sony Xplod ZR1252B 800watt max. I know its an Xplod, but for $20 I have a 4 year protection plan. Best Buy will replace or fix it if it fries, shorts out, etc. It seems like a decent amp for 1 or 2 10"s. How do sony amps hold up? I know their head units suck.

alright, well it looks like i'm looking for a new amp. thanks

K well i opened up the amp and found a burn and what looks to be a screw that gorund the board to the case. If the case isn't grounded would that throw it into protect? Burn The Ground Screw???

so I pulled the cover off and there is a nickle-sized smoke/black mark on the board by a resistor. So back to what is a good cheap amp, 800-1400 watts, 4,2,or 1 Ohm, and under $150?

its a single 4 ohm.

4 maybe 2 ohm. 800-1400 watts. under $150.

well what amp would you recommend caddy, that is cheap? What about Soundstorm?

it has a 4 gauge power from the battery and 4 gauge ground. I kno i should have the ground hooked up first but I dont always listen to myself. lol

damn that amp was gonna be my cheap $25 way out of buying a new amp.

i kno the woofer is good. i'm pretty confident in the ground. checked the amp fuse. what would be bad in the amp?

as soon as i touch the ground to it it goes to protect.

I made my first box. It has a pioneer 10" and a SPL Audio Series I amp that I bout off of a friend that was sitting in his room. I finally got to test it today but it is showing me the protect light. Its not the RCAs and I've tried 3 different grounds. Any suggestions???

I haven't had another chance to check for the 12v again. I had already tried to find a 12v that's what I was referring to. The LED to speaker was a question for a Sub box I am building. I was thinking about LED the pulse to the music. I know they have modules that do it, but I was wondering. But I would like to thank those who stood up for me. I know I'm not an expert, but the kid who wanted me to hook these up knows that too, but it is s hell of a lot cheap than most shops. The Duals I put in a Blazer, 5 months and the LEDs still work. Not the best sound quality but they light up. lol. That's all some people care about.

Oh and I would never half ass some thing in a customers car. This kid is getting a deal. We wired a head unit, 4 speakers, and a sub/amp. All wires are hidden. We had most of the interior out hiding the wiring. We only charged him $60 for labor. we had about 12+ hours in it. Every connection is soldered and heat shrinked.

i was never questioning anyone's experience. I was just curious. Mostly for myself. I'm getting ready to build a new box for my firebird. one side is gonna be plexiglass, I think... and I was gonna light the inside with LEDs.

no, i just want to know what would happen? would they even work? i know how LEDs work and how speaker output alternates, but would the LEDs flash or just not work?

ok. I was planning on just running another power line. just out of curiosity what would happen if u hooked up the LEDs to the speaker lines?