Chris661

thanks you very much. i apprate all you help!!! because i can...(dnt mean to sound mean or anything.) RFt2001bd high alt. 0ga all around. big three. i have power.

bump anyone

bump. ok correct me if im wrong. i have a box H30 W46 D14 my tune is 32hz ok with torres cal. PORT H4.5 W16.5 L16 with this i get port area of 74.25. now if i do another port the same size will i get 148.5 port area right??? and have a tune of ~32hz? thanks _CHRIS

can i have an example. please? thanks chris

here what im lookin to do. ghetto paint again

sorry double post http://www.carstereo.com/help/Articles.cfm?id=31 at the bottom of the page do i use this? Quantity of ports 2 Enter Enclosure Volume 9.17 Enter Desired Tuning Frequency 32hz sloted port -yes Enter Height 4.5" Enter Width 16" Vent Length 26.32" is this the correct port length?

hahaha what would be the way? THANKS CHRIS

bump again. sorry/ i didnt want to make a new thread so ill post my qestion here. ok here it is. i have a port that is W 4.5" H 32.5" L 20" with this i have a tune of 34.4hz box is H30 W46 D14 Question - can i do half of each height nd width nd length and with that make two slot ports and have the same tune or will it be different? example Height 32.5" = 16.25" width 4.5" = 2.25 length 20" = 10" thanks -CHRIS

this how it should look like sorry ghetto paint.. THANKS ALL TO HELP ME! LEARN ALOT. _CHRIS

sound good. yea i understand. now all that done with i think the sub gonna run into the port since it gonna be L. but im going to add another baffle over it so it should space it out more.

ok i done that i come up with 27in but i still have - number on torres cal.?

so if i go bigger then 146.25 im ok right? yeah im kind of confused abt the negative...anyone else can help with this? ok i change the length number to 27in cames out the 34.85hz thanks. -CHRIS

first jst wanna say big thanks to the people who are helping me out!!! got some qestions. what in blue. tune i want 34hz but torres cal. say 36hz? what is in red. very close to port size cal. (146.03) nd torres cal. is (146.25) with this number it is tune to 34hz correct? one more question i see a ( - negitive number) could this mean bad??? what circle in yellow. thanks so much!!! -Chris ps i change the height of box so the port can clear the top part of the sits.

ok sound good. im play around more with torres cal. nd if i come up with something good ill post it up again. to verify if it correct. thanks so much guys. -CHRIS

i beleve there was an update. ok i done that.. i get Minimum Diameter 13.23in Minimum Area =137.44in Length of a side for a square vent =11.72in i am think i have to come up with 137.44ish for the box port area. right?? sorry for so much questions. im learing nd every help will appratade.

ok i done it.

sorry for double post. jst mess around abit more. hope this one look better then the first. re box cal. if this good port for the sub i will be going this one. PS box is going chevy s10 ext cab. thanks -chris

sorry. im still not using to makin port with torres Box cal. im use to doing it by RE cal. i just wanted to try something different. well i figure go big or go home. as from the site (fi audio) saying 5-10cuft. ported box. im running rockford fosgate t2000.1bd let me ask again. can anyone give me a design that is best with the sub. hw much room i got to play with. H34 W46 D14 nothing over that. thanks chris

hello all!. my question is this all correct. port area port range..ect. BTL 18 fully load. thanks -chris

dont mean to sound dumb but what the emails? is it [email protected]?

im trying to remember. what i order. i knw it not full loaded. but it was close to be.

never thought they keep them. to be excacted i found a pic that has the date of the sub when i got it. 2/19/09

bump anyone please.. -chriz

well if i am right if it five months old.. im guess 09